Better images of Cicada Nymph by Toast Boy (Alpharetta, Ga) Better images of my Cicada Nymph model Read more
Cicada Nymph by Toast Girl (Alpharetta Ga) Made with half a square Read more
Robin Star by Govind Kulkarni (Hyderabad, Telangana State, India) This is designed by Maria Sinayajaya Read more
Supersized UFO magic Star by Nicolas (Olive Branch, Mississippi, USA ) Read more
Little Rose Kusudama by Suhail Skalli (South Africa) Instagram Folded by Suhail Read more
Bianca's Classroom Crane Project As teachers, it is our job to teach students about the world both past and present. Read more
3 Tulips, 2 Twist Flowers, 1 Rose Bowl by Geronimo (USA) Hope you enjoy flowers! Read more
Chaos Theory Tessellation by Stacie (NJ, USA) This is a tessellation that I designed and folded. It utilizes many shapes Read more
Mermaid by Jeramy (Neptune) 3500 pieces of .5 inch by .25 inch (1.27 cm X 0.635 cm) pieces of paper Read more
5 Feather Peacock by Stanley (Mississauga, Ontario, Canada) Hard to describe this 3D model...it have three tail feathers but have Read more
Big 3D Swans by Stanley (Mississauga, Ontario, Canada) Used 1/8 size paper for these swans...they're huge, as big as a Read more
Dinosaurs by Stanley (Mississauga, Ontario, Canada) Dragons of dinosaurs....your pick. Read more
Orange Cat by Stanley (Mississauga, Ontario, Canada) This orange cat looks like my orange tabby cat. Read more
Tropical fishes by Stanley (Mississauga, Ontario, Canada) I went on a 3D fish building craze... Read more
Big Scorpion by Stanley (Mississauga, Ontario, Canada) Used 1/16 size paper for this model. I put bend plastic films (Plastic Read more
Red Baron Tri-Wing Plane by Stanley (Mississauga, Ontario, Canada) This was a pretty big project...over 1,200 triangular pieces. The body Read more
Big Owls by Stanley () Made four of them, all with 1/8th size paper/triangles....and card stock paper as regular paper Read more
Twisty Dragon by Stanley (Mississauga, Ontario, Canada) Glued it section by section and holding each section in their curve until Read more
Tank by Stanley (Mississauga, Ontario, Canada) Mississauga, Ontario, Canada Read more
Big Marill Pokemon by Stanley (Mississauga, Ontario, Canada) Used 1/8 size card stock paper to make this big Marill Pokemon...regular Read more
Mudkip Pokemon by Stanley (Mississauga, Ontario, Canada) First try at it...came out to be pretty good. Next time I'll make Read more
Big Torchic Pokemon by Stanley (Mississauga, Ontario, Canada) Did a few 1/32 size Torchic Pokemons...this one is using 1/8 size Read more
Big Pikachu Pokemon by Stanley (Mississauga, Ontario, Canada) Use 1/16 size paper to make the big Pikachu Pokemon. Big, teenager Read more
2nd Kusudama Flower Ball by Stanley (Mississauga, Ontario, Canada) Second one in a span of five days...this one consisted of Read more
1st Kusudama Flower Ball by Stanley (Mississauga, Ontario, Canada) Used 6" x 6" origami paper...wanted to use smaller paper but Read more
Origami - Wingull - Pokemon by Emanuel Lucho (Veracrz, Mexico) I made this little guy, one pokemon bird. Read more
Tribute to The Twin Towers by Stanley (Mississauga, Ontario, Canada) Nine year old Sophia started it!!! She assembled 99% of Read more
3D Red Dragon by Stanley (Mississauga, Ontario, Canada) Used Christmas wrapping paper...which is a bit thin and easy to tear. Read more
Charizard Pokemon by Stanley (Mississauga, Ontario, Canada) Took me over 6 hours to assemble and glue Charizard...used 710 triangular pieces. Read more
Big and Small 3D Butterflies by Stanley (Mississauga, Ontario, Canada) The big ones are made with 1/32 size paper and Read more
Canada 150th Anniversary Big and Small Spread-Wings Swans by Stanley (Mississauga, Ontario, Canada) Made a bunch of the small spread-wings Read more
Japanese Brocade in Gold Foil Earrings by Grace M (Australia ) Japanese brocade by Minako Ishibashi made into earrings using Read more
Origami Pentagonal Spinning Star by Masoudhosseini (Tehran, Iran) origami pentagonal spinning star designed by: Masoud Hosseini on December,2017 diagrammed by: Read more
Origami Simurgh by Reza Sarvi (Iran-Shiraz) Simurgh is the name of a mythical-legendary Iranian figure. He plays an important role Read more
Canada 150th Anniversary Swans by Stanley (Mississauga, Ontario, Canada) Made a couple of Red and White swans to celebrate Canada's Read more
Origami Ostrich by Farshid Sobhani (Tehran, Iran) this is origami Ostrich folded with square paper 40 gms folded by farshid Read more
Origami Tiny Rabbit by Farshid Sobhani (Iran Tehran) This is tiny rabbit folded with a square paper 40gms. Folded by Read more
F-18 Hornet Fighter Jet Plane by Farshid Sobhani (Iran-Tehran) F-18 Hornet fighter jet plane Fold by farshid sobhani with one Read more
Money Elephant by Hong Tam (Saigon) Read more
Money Fox by Hong Tam (Saigon) Read more
Money Butterfly by Hong Tam (Saigon) Read more
Damavand Volcano by Reza Sarvi (Shiraz-Iran) Mount Damavand is the 12th most prominent peak in the world, and the second Read more
1st Snapology project - Egg by Stanley (Mississauga, Ontario, Canada) First one...took about 4 hours to complete...and I did use Read more
Origami Zahhak by Reza Sarvi (Iran-Shiraz) This is a model of persian legend from Ferdowsi's Shahnameh.Zahhak was a king kissed Read more
Pokemon Kids by Stanley (Mississauga, Ontario, Canada) Made some small versions of some 3D Pokemon characters. Used beads for the Read more
Easter 2017 by Stanley (Mississauga, Ontario, Canada) Some 3D chicks, eggs and rabbits...just in time for Easter. The white rabbit Read more
Origami Right Triangle Bird by Reza Sarvi (Iran-Shiraz) I folded and designed this pattern by myself. It's made by one Read more
Piplup Pokemon and 2 Small Owls by Stanley (Mississauga, Ontario, Canada) Piplup Pokemon used over 800 triangular pieces...I really like Read more
Two 1/64th size Butterflies by Stanley (Mississauga, Ontario, Canada) The 1/32th paper butterflies were huge...slightly bigger than my palm, so Read more
Tarantula by Stanley (Mississauga, Ontario, Canada) Used 1/64th size paper and it still came out big. The Green Scorpion used Read more
Origami Griffin Capital by Reza Sarvi (Iran-Shiraz) This is a model of ancient persia-persepolitian column with double headed Griffin Capital. Read more
Vase of Flowers by Stanley (Mississauga, Ontario, Canada) Not too bad, not a single flower used a hundred triangular pieces Read more
Roselia and Pichu Pokemons by Stanley (Mississauga, Ontario, Canada) Making the little roses for Roselia was almost harder than making Read more
Origami Great Cyrus Tomb by Reza Sarvi (Iran-Shiraz)) This is a model of great Cyrus Tomb. This pattern all diagrammed Read more
Origami Bull Capital by Reza Sarvi (Iran-Shiraz) This is a model of ancient persia-pesepolitian column with double headed bull capital. Read more
Togepi and Torchic Pokemon by Stanley (Mississauga, Ontario, Canada) On a Pokemon roll....my 5th and 6th project; Togepi and Torchic. Read more
Pokemon Characters by Stanley (Mississauga, Ontario, Canada) Pikachu, Cleffa, PokeEgg, and Marill. Read more
Twin Butterflies by Stanley (Mississauga, Ontario, Canada) Added a few more triangular pieces to the extras and made two butterflies. Read more
Green Scorpion by Stanley (Mississauga, Ontario, Canada) The creep crawler is over 6" long. Read more
Golden Venture Swans with Spiral Design by Stanley (Mississauga, Ontario, Canada) Both have open wings with spiral designs. The orange-green Read more
12 Days of Christmas by Stanley (Mississauga, Ontario, Canada) Made 11 swans to add to my first swan over the Read more
Three Dollar Eastern Dragon by Andrew Lei (Rogers, Arkansas, USA) Modular. Made from three one dollar bills. Read more
Jewelry Box by Shabbir Bandukwala (Karachi, Sindh,Pakistan) I made a jewelry box which I have learned from YouTube Origami 172. Read more
Origami Tessellation by Waralow Kami (Tehran, Iran) 64 division and triangle grid and rectangle size of paper . design by Read more
New Version Tulip by Shabbir Bandukwala (Karachi, Sindh,Pakistaon) I have created a new version of tulip Read more
2 Tulip 1 New Flower in the Pot by Shabbir Bandukwala (Karachi, Sindh, Pakistan) 2 Tulip eight petals and one Read more
Pencil Holder with Foto Frame by Shabbir Bandukwala (Karachi, Sindh, Pakistan) Used two colors of paper sheet six paper has Read more
Pencil Holder by Shabbir Bandukwala (Karachi, Sindh, Pakistan) Used four paper to make one pencil holder Read more
Origami Japanese Peacock by Shabbir Bandukwala (Karachi, Sindh, Pakistan) One paper origami peacock publish in Japanese origami magazine Read more
Let there be Dragons!!! by Stanley (Mississauga, Ontario, Canada) Well, only one dragon...but with three heads. Took me 4 tries Read more
Flowers, Dragonflies, Butterflies, Lucky Stars and a Cat. Oh my. by Stanley (Mississauga, Ontario, Canada) Bouquet of flowers in 200 Read more
Pocket For My Pocket by Kevin (Reno, NV, USA) I made this attempting something else. So I saved it in Read more
3D Origami Tiger 2 by Mark (south Korea) Tiger 2, be happy! Read more
3d Origami Tiger by Mark (South Korea) Tiger Read more
Abstracted Summer V by Patricia C. Coleman (Bloomington, Indiana) I love creasing, folding and forming. Here are other forms I Read more
Money Dachsund by DN by DN (USA) I made this little guy folding the front of a peacock on both Read more
Money Agave by DN (USA) Read more
Dollar Bill Baskets by DN (USA) I learned to fold these Easter Baskets from this YouTube video. The only improvements Read more
Origami Cross Bookmarks by Pat Wheeler (Hot Springs, AR) It has been interesting visiting your site. Thank you. Read more
120 unit Icosidodecahedron by Stephanie K (Oregon, US) This origami is filled with 9 paper cranes, so that the total Read more
High Tech Paper Plane 2 by Stan Soroken (Salinas, California, USA) One more of my paper airplane designs. Read more
Cranes by Arnav Bhanwala (Cleveland, Ohio,USA) This is my creations .I love making Origami. Read more
4 Different Box Cranes by Sophia & Stanley (Mississauga, Ontario, Canada) Added two more different box cranes to the two Read more
Rose with Leaves by Romi (Philippines) This is made of two parts. One is the rose, folded from a 9" Read more
Pair of Box Cranes by Sophia & Stanley (Mississauga, Ontario, Canada) 6 1/2 year old Sophia helped uncle Stanley make Read more
3D Dragonflies by ophia & Stanley (Mississauga, Ontario, Canada) 7 year old Sophia and uncle Stanley made 20 3D Dragonflies Read more
3D Small Swan by Sophia & Stanley (Mississauga, Ontario, Canada) My 6 1/2 year old niece Sophia's first 3D model...a Read more
Butterfly Jasmine - White Ginger by Delores Humphrey (Corbin, Ky.) Inspired by my niece (due in Dec.) Her father is Read more
3D Peacock with 3 Tail Feathers by Stanley (Mississauga, Ontario, Canada) Third 3D project. Had to throw away the first Read more
Origami Mobile by Stanley (Mississauga, Ontario, Canada) In all the years of paper folding I never bothered to do a Read more
Penultimate Dodecahedron by Franck Ramaharo (Antananarivo, Madagascar) Dodecahedron made from 30 penultimate modules (attributed to Robert Neal). Read more
3D Silver & Purple Chinese Dragon by Stanley (Mississauga, Ontario, Canada) My 2nd 3D origami project. This one took a Read more
3D Dinosaur by Stanley (Mississauga, Ontario, Canada) My first attempt at 3D origami. For the purple dinosaur I used 3.5cm Read more
Star Ball by Franck Ramaharo (Antananarivo, Madagascar) Star Ball designed by Tomoko Fuse made from 30 units of A4 paper. Read more
Ant Lion's Nest by Franck Ramaharo (Antananarivo, Madagascar) Ant Lions Nest, same unit (30u) but different assembly. Design is attributed Read more
3D Origami Minion by Giulia (Oregon, US) Recently i made this 3D origami minion and posted a tutorial on youtube Read more
Little Turtle Dodecahedron by Franck Ramaharo (Antananarivo, Madagascar) Dodecahedron made from 30 double-sided concave hexagonal units (little turtle units). The Read more
Origami New Tulip 16 Petal by Shabbir Bandukwala (Karachi, Sindh, Pakistan) Make two water bomb base insect second into first Read more
Origami New Tulip 8 Petal by Shabbir Bandukwala (karachi,sindh,pakistan) Blintz fold tulip fold diagram new version in tulip. Read more
Dinos to Israel by Joyce Aysta (Los Angeles) these 2 dinos are part of a set of 5 that I Read more
5 Dinos by Joyce Aysta (Los Angeles) These 5 pieces are on their way to the Jaffa Museum in Israel Read more
by Joyce Aysta (Los Angeles) Artist Statement I am a self-taught paper artist who creates realistic, rectilinear and monochromatic origami Read more
Curved Creases by Joyce Aysta (Los Angeles) Artist Statement I am a self-taught paper artist who creates realistic, rectilinear and Read more
Menger Sponge (Level 1) by Franck Ramaharo (Antananarivo, Madagascar) Level 1 Menger Sponge made from Tomoko Fuse square module (72). Read more
Baskeet by Romi Halabaso (Philippines) This is my first original origami creation for 2015. Happy New Year to all! You Read more
Business Card Holder by Phillip Bonner (Goolwa South Australia) I searched for a Business Card Holder and found one by Read more
T-39 Paper Plane by Stanley S (USA) Read more
Winged Boat by Alexander (Canada) This is a winged boat that I designed for a high school project. 5 stars Read more
Master Yoda by Egor (Chicago IL) Master Yoda Green =)) I like this model) Read more
Sonobe Stellated Icosahedron by Franck Ramaharo (Antananarivo, Madagascar) Stellated Icosahedron made from 30 Sonobe units. The model is also called Read more
Mosely Snowflake Sponge Fractal (Level 3) by Franck Ramaharo (Antananarivo, Madagascar) The design of this fractal is attributed to Dr. Read more
Jerusalem Cube Fractal (Level 1) by Franck Ramaharo (Antananarivo, Madagascar) The Level 1 Jerusalem Cube is almost similar to the Read more
WXYZ (Intersecting Planes) by Franck Ramaharo (Antananarivo, Madagascar) Four Intersecting Triangles made from Tung Ken Lam's WXYZ module. Editor's note: Read more
Desert Flower by Hideo Kumayama (São Bertardo do Campo-SP-Brasil) Pentagonal paper Read more
Spiked Icosahedron by Franck Ramaharo (Antananarivo, Madagascar) This spiked icosahedron is made with Nick Robinson’s trimodules (30 modules). Editors note: Read more
Vann's 5 Card Pentagonal Hassock by Franck Ramaharo (Antananarivo, Madagascar) This business card polyhedron is a variant of a cuboctahedron Read more
Gyroscope Octahedron by Franck Ramaharo (Antananarivo, Madagascar) Octahedron made with 6 Gyroscope Modules (attributed to Lewis Simon). Editor's Note: Gyroscope Read more
Gyroscope Cuboctahedron by Franck Ramaharo (Antananarivo, Madagascar) Cuboctahedron made out of 12 gyroscope module. I use 9x9cm paper blocks for Read more
Cosmos Origami by Hideo Kumayama (São bernardo do Campo-SP-Brasil) Heptagonal Paper Read more
Business Card 4-Pieces Cuboctahedron by Franck Ramaharo (Antananarivo, Madagascar) The design of the 4-pieces cuboctahedron unit is attributed to Valerie Read more
Mosely Snowflake Sponge Fractal (Level 2) by Franck Ramaharo (Antananarivo, Madagascar) The design of this beautiful fractal is attributed to Read more
Six Petals Flower by Hideo Kumayama (São Bernardo do Campo-SP-Brasil) Hexagonal paper Editor's Note: More origami flowers here. Read more
Seven Petals Flower by Hideo Kumayama (São Bernardo do Campo-Sp-Brasil) Heptagonal Paper Editor's Note: More origami flowers here Read more
Heptagonal Box I by Hideo Kumayama (São Bernardo do Campo-SP-Brasil) Paper size 2:1 Inspiration Shuzo Fujimoto Box Read more
Menger Sponge (Level 2 and Level 3) by Franck Ramaharo (Antananarivo, Madagascar) Level 2 & 3 Menger Sponge made out Read more
Decagonal Box by Hideo Kumayama (São Bernardo do Campo-SP-Brasil) Paper 15x15 Read more
Hexagonal Box Variation by Hideo Kumayama (São Bernardo do Campo-SP-Brasil) Self Closed Variation Paper Size 7:4 (49x28) Box Size 2:1 Read more
Hexagonal Box - Self Closing by Hideo Kumayama (São Bernardo do Campo-SP-Brasil) Square Paper size 15x15 Read more
Octagonal Box - Self Closing by Hideo Kumayama (São Bernardo do Campo-SP-Brasil) Square Paper size 15x15 Read more
Dollar Bill Coat Tie by Denny (USA) Coat and Tie made with two $1 bills. Read more
Octagonal Box by Hideo Kumayama (São Bernardo do Campo-SP-Brasil) 2x Square paper Size 15x15 Inspiration Twist Box Shuzo Fujimoto Read more
Heptagonal Box by Hideo Kumayama (São Bernardo do Campo-SP-Brasil) Paper Size 1:√2 184x260 Read more
Eneagonal Box by Hideo Kumayama (São bernardo do Campo-SP-Brasil) Paper size 2;1 26:13 Read more
Hexagonal Box I by Hideo Kumayama (São Bernardo do Campo-SP-Brasil) 1. Folding one side of the square paper into 4 Read more
Hexagonal Box by Hideo Kumayama (São Bernardo do Campo-SP-Brasil) 2x Square Paper Size 15x15 Inspiration Shuzo Fijimoto Twist Box Read more
Hexagonal Box with frame by Hideo Kumayama (São Bernardo do Campo-SP-Brasil) 3x Square paper Size 15x15 Inspiration Masu Box http://vallebird.files.wordpress.com/2014/05/masu.pdf Read more
Octogonal Star Variation by Hideo Kumayama (São Bernardo do Campo-SP-Brasil) Inspiration (Extra Twinkles) Fuse's Star http://www.prospero78.freeserve.co.uk/diagrams/twinkles.gif Read more
Pentagonal Box I by Hideo Kumayama (São Bernardo do Campo-SP-Brasil) Self Closing Paper 15x15 Read more
Pentagonal Box by Hideo Kumayama (São Bernardo do Campo-SP-Brasil) Paper 2:1 (26x13) Read more
Decagonal Box with Lid () Decagonal Box Square paper size 25x25 Lid Rectangular paper size 2:1(26x13) Inspiration Shuzo Fujimoto Read more
Jet Paper Airplane by Stan Soroken (Salinas, CA USA) A few more of my paper airplane designs. Read more
Heptagonal Star by Hideo (Kumayama) Modular Heptagonal Star Read more
Decagonal Star I by Hideo Kumayama (São Bernardo do Campo-SP- Brasil) Modular Decagonal Star Read more
Simple Origami Bookmark by Kaylee (Ooltewah, TN, USA) I folded it for myself. I used sticky notes. It probably took Read more
Eneagonal Star by Hideo Kumayama (São Bernardo do Campo - SP-Brasil) Modular Eneagonal Star Read more
Wonder Kusudama by Lidiane Siqueira (Teresina, Piauí, Brasil) Made with 1:2 rectangular paper (3.75 cm x 3.75 cm). Module compound. Read more
Decagonal Star (back) by Kumayama, Hideo (São Bernardo do Campo - Brasil) back decagonal Star Read more
Decagonal Star by Kumayama, Hideo (São Bernardo do Campo - Brasil) Modular decagonal star Read more
Dinosaur by Aniss Mesli () A model that took me three weeks to design. It starts with a bird base. Read more
Purple Swan (3D Origami) by Origami Nation () You can find more models on youtube: https://www.youtube.com/channel/UCJVJ5CZYnIhuLFeW4AE_c7A or facebook: https://www.facebook.com/origamination Read more
Small Hearts by Origami Nation () You can find more models on youtube: https://www.youtube.com/channel/UCJVJ5CZYnIhuLFeW4AE_c7A or facebook: https://www.facebook.com/origamination Read more
Black Swan by Origami Nation () You can find more models on youtube: https://www.youtube.com/channel/UCJVJ5CZYnIhuLFeW4AE_c7A or facebook: https://www.facebook.com/origamination Read more
Swan by Origami Nation () You can find more models on youtube: https://www.youtube.com/channel/UCJVJ5CZYnIhuLFeW4AE_c7A or facebook: https://www.facebook.com/origamination Read more
3D 3 Petals Flower by Shabbir (Karachi,Sindh,Pakistan) detail comming soon Read more
Literary Leaf Earrings by Unknown () Folded for sale from paper from an old book. Each earring is made from Read more
Kawasaki Rose by Thomas Leung-Tack (Canada) Read more
Fire Truck with Movable Parts by Charles "Doc" Santee ((near) Chicago, IL) Origami Fire Truck Folded from many rectangles of Read more
Horse by Dalas Dimitris (Greece) by Dalas Dimitris. More origami horses here Read more
Pegasus by Dalas Dimitris (Greece) Read more
Scorpion by Romie Halabaso (Philippines) For this simple box pleated scorpion model, I used one whole sheet of rectangular colored Read more
Origami 3D by Maria Nguyen (Oklahoma) Happy origami Read more
Crocodilo - Crocodile by NunoSilva (Ribeira Grande, São Miguel, Açores, Portugal) Eis outro diagrama que eu criei, esse nem me Read more
Lovely Art by Shiela Pormilos (Iloilo, Philippines) I used to buy books to learn & sometimes only imaginations Read more
Swallows by Romie (Philippines) I came up with these simple origami swallows by doodling with the waterbomb base. The tails Read more
Pinwheel Tessellation (Extended) by Devon H. (USA) This is a model I designed after reading a small portion of Robert Read more
Kids on a Seesaw by Devon H. (USA) An original model that I designed based on the discovery that I Read more
Crane Hat by Brenda (Dallas) This hat was originally created for Cinco da Mayo with tiny paper cranes surrounding the Read more
8 Intersecting Planes By: Deepika Pratap, Santa Clara, CA, US Reference: Ornamental Origami: Exploring 3D Geometric Designs book by Meenakshi Read more
3D Peacock by Deepika Pratap (Santa Clara, CA, US) Origami 3D peacock Read more
Modular Origami by Deepika Pratap (Santa Clara, CA, US) Five Intersecting Tetrahedra Read more
Origami Architecture Greeting Cards by Joyce Aysta (Los Angeles) I make Origami Architecture greeting cards of Los Angeles, San Francisco, Read more
Origami by Maria (Oklahoma) Read more
Australia by Michael Clonarisa (Japan) Made from rectangle 2 by 1 paper.From a jumping frog base.Purists can make this with Read more
Ancient Dragon by Thomas Leung (Longueuil, Canada) This is Satoshi Kamiya's Ancient Dragon. I used a 50X50 cm sheet. (Kurotani Read more
Deadalus and Icarus's Flight by Joseph Benton (Aliquippa PA USA) Hope you like them. Took me almost forever. Read more
Origami Cobra Family by Johann (Deurne, Antwerp, Belgium) Demons were often regarded as the evil of darkness. This will change Read more
Quilling by Maria (oklahoma) I begin to quill with some friends That I lot contact for many years Just recent Read more
The F118 Jet by Jeremiah (Virginia) This paper plane took some time to make but came out great Read more
Origami Luster by Mohsen Moossavi Zadeh (Mashhad, Khorasan Razavi, Iran) Read more
Flat Luster by Mohsen Moossavi Zadeh (Mashhad, Khorasan Razavi, Iran) Origami Flat Luster Design and folded by Mohsen Moossavi zadeh Read more
Hat by Mohsen Moossavi Zadeh (Mashhad, Khorasan Razavi, Iran) Origami Hat Read more
Flower Tato by Romie (Philippines) I made this tato starting with the traditional star box. To learn how to fold Read more
Lovebirds Box by Romie (Philippines) I made this model starting from a waterbomb base. To see more of my original Read more
Senbazuru Ring by Stephanie K (Oregon, USA) I folded all 1,000 cranes over the course of four days, and later Read more
Tera Crystal Cube by Stephanie K (Oregon, USA) The Tera Crystal Cube is made of 1,134 sheets of 2 1/8" Read more
Springs by Krystyna Burczyk (Krakow, Poland) It's my own design made of strips (2012) Read more
Beans by Krystyna Burczyk (Krakow, Poland) It's my own work made of 72 modules (September 2012) Read more
Stars by Krystyna Burczyk by Krystyna Burczyk (Krakow, Poland) It's my own work made of 24 modules (June 24th 2012) Read more
Golden Dream by Krystyna Burczyk (Krakow, Poland) It's my own design made of 24 modules (June 2012) Read more
Wedding "Save the Date" & Invitation Cards by Giovannirussografico (info@giovannirussografico.com) Our POP-UP CARDS are an Elegant and Refined article, Ideal Read more
Commercial & Advertising Subjects by GIOVANNIRUSSOGRAFICO (Limena, Padova, Italy) Our POP-UP CARDS are an Elegant and Refined article, Ideal for Read more
Christmas Greetings by GIOVANNIRUSSOGRAFICO (Limena, Padova, Italy) Our POP-UP CARDS are an Elegant and Refined article, Ideal for every occasion, Read more
Medieval Castles by Giovannirussografico (Limena, Padova, Italy) Our POP-UP CARDS are an Elegant and Refined article, Ideal for every occasion, Read more
British Cathedrals by GIOVANNIRUSSOGRAFICO (Limena, Padova, Italy) Our POP-UP CARDS are an Elegant and Refined article, Ideal for every occasion, Read more
Tennis Club & Hotels by Giovannirussografico (Limena, Padova, Italy) Our POP-UP CARDS are an Elegant and Refined article, Ideal for Read more
Venetian Villas and French Chateau by Giovannirussografico (Limena, Padova, Italy) Our POP-UP CARDS are an Elegant and Refined article, Ideal Read more
Monuments of Venice, Italy by Giovannirussografico (Limena, Padova, Italy) Our POP-UP CARDS are an Elegant and Refined article, Ideal for Read more
Monuments of Rome, Italy by Giovannirussografico (Limena, Padova, Italy) Our POP-UP CARDS are an Elegant and Refined article, Ideal for Read more
Monuments of Padua, Italy by Giovannirussografico (Limena, Padova, Italy) Our POP-UP CARDS are an Elegant and Refined article, Ideal for Read more
Monuments of Milan, Italy by Giovannirussografico (Limena, Padova, Italy) Our POP-UP CARDS are an Elegant and Refined article, Ideal for Read more
Homem Cartaz / Man Sandwich Board by Nuno Silva (Ribeira Grande, São Miguel, Açores, Portugal) Esse é um outro modelo Read more
Sapo Acrobatico / Acrobatic frog by Nuno Silva (Ribeira Grande, São Miguel, Açores, Portugal) Um melhoria do tão já famoso Read more
Envelope Para 2 CD's / CD Case for 2 CD's by Nuno Silva (Ribeira Grande, São Miguel, Açores, Portugal) Eis Read more
Cat by Romie (Philippines) See more of my original origami models at http://romigami.wordpress.com and follow me also at https://twitter.com/PinoyOrigamist Read more
Baseball Cap by Romie (Philippines) See my other cap model at http://romigami.wordpress.com Read more
Hexagon Bowl by Romie (Philippines) I designed this model from a hexagon-shape paper which I cut from a square sheet Read more
Black & White by Cridiana (Romania) Model: Columbus cubes Author: David Mitchell Book: "Origami Matematico" Model: Panda Author: Seiji Nishikawa Read more
Oriental Flower Pot by Romie (Philippines) This is an enhanced version of the classic star box, which I created by Read more
Flower Photo Frame by Shabbir (Karachi, Sindh, Pakistan) It my own work. make it with 8 paper of different colour Read more
Creatures by Henry Tovar (Venezuela Caracas) another mastepiece by me Read more
Dinosaurus and Other Prehistoric Reptiles by Henry Tovar (Venezuela Caracas) more animals Read more
Animals 3 by Henry Tovar (Venezuela Caracas) Read more
Quetzalcoatlus by Henry Tovar (Venezuela, Maracay) Read more
Other Animals by Henry Tovar (Venezuela Maracay) another example of my work Read more
Animal 2 by Henry Tovar (Venezuela Maracay) Read more
Animal 1 by Henry Tovar (Venezuela Maracay) Read more
Dinosaurus and Some Animals by Henry Tovar (Venezuela Maracay) this is a example of my work and creativity in origami Read more
Don't Tread on Me!! by Facebook Friends () Another hidden clue to use in the next National Treasure Movie Dollar Read more
My First 3D Swan Origami by Elaine Cruz (Doha, Qatar) I would like to thank the maker of this website. Read more
Dragon by Garazi Muguruza (Spain) This is my second origami project, I wanted to do something more difficult, I hope Read more
Águia - Eagle by Nuno Silva (Ribeira Grande, São Miguel - Açores, Portugal) Mais uma de minha autoria, criada a Read more
Snake Head Puppet by Isa Serralde (Plano, TX) I designed this snake a couple years back, just remembered I had Read more
TARDIS Crease Pattern by Isa Serralde (Plano, TX) I've spent a good deal of time musing over the shape of Read more
Giant Checkers Set by Don (Texas) This is my giant origami checkers set. The entire board is an entire 64-piece Read more
Black Spider by Le Anh Tu (HCM City) Read more
Horse by Ahmed (Tunis) Read more
Sun by Romie (Philippines) I made this model using the blintzed frog base. For more of my original origami models, Read more
Dragonfly by Romie (Philippines) I hope you like this. Visit my origami blog at http://romigami.wordpress.com Read more
Crab by Eun-Soo Jeon () http://unsjn.deviantart.com/ Read more
3D Swan by Eun-Soo Jeon (United Kingdom) http://unsjn.deviantart.com/ visit my page for more 3D origami 🙂 comment, favourite and share Read more
Mermaid by Romie (Philippines) This is the latest of my original origami creations which you can all see in my Read more
Flower by Kanika (Dhaka, Bangladesh) Read more
Tyrannosaurus by Romie (Philippines) For this model, I used a blintzed bird base. To see more of my original origami Read more
Lion by Romie (Philippines) Here's a lion model. The base for this is the same as that for the unicorn Read more
Resident Evil - Umbrella Corporation Emblem by Igor (Osijek, Croatia) Read more
Unicorn by Romie (Philippines) I created this model using 30 and 15-degree folds. You can see my other original origami Read more
Abstract Bird by Kathy Knapp (Peoria, IL, USA) Found in Foilrigami, by Mark J. Medvene, 1969 Read more
Spiral Flower by Unknown () Spiral Flower from Scaffold Newsletter Vol. 1 No. 6, July 1 2001. Diagram link on Read more
Alien Bug by unknown ( ) The origami alien bug that I created. I made it by playing with the Read more
Rabbit by Romie Halabaso (Philippines) This model is folded starting with a blintzed pig base. For more of my original Read more
Wallet by Romie Halabaso (Philippines) This model I designed and folded using a 17" x 17" square cut from a Read more
Fantastic Origami Art by Safeya Ghazy (Egypt Alexandrea) My lovely paper art. Read more
Origami Rose by Unknown (India) origami rose - one square uncut - wetfolded creator: evi binzinger - paper: franke and Read more
Carabao (Water Buffalo) by Romie Halabaso (Philippines) The carabao or water buffalo is a familiar feature of the Philippine countryside. Read more
Home Scenery by Yusra Arif (Mirpurkhas) Read more
Barco à vela - Sailboat by Nuno Silva (Ribeira Grande, São Miguel, Açores) Uma barco à vela... e flutua posso Read more
Squirrel by Romie Halabaso (Philippines) This model starts with a blintzed square. For more of my original origami models, go Read more
Estrela Cadente / Shooting Star by Nuno Silva (Ribeira Grande, Açores, Portugal) Outro modelo que criei a partir de um Read more
Águia/Fénix , Eagle/Pheonix by Nuno Silva (Ribeira Grande, Açores, Portugal) Criei esse modelo tendo como inspiração o origami de Mario Read more
Christmas Cards by Briggitt (New-Caledonia) Just to thank you for the origami site : it's really nice 🙂 I used Read more
Crab by Romie Halabaso (Philippines) This is work in progress. Hope you like it. There's more to see in my Read more
Origami Swans by Sunitha K (India) paper art. See my blog: http://o-artgallery.blogspot.com/ Read more
Lady in Gown by Romie Halabaso (Philippines) This is a simple representation of a female human figure -- a lady Read more
Flower Pot by Sunitha K (India) paper art. See my blog: http://o-artgallery.blogspot.com/ Read more
Flower Basket by Sunitha K (India) paper art. See my blog: http://o-artgallery.blogspot.com/ Read more
Spider by Romie Halabaso (Philippines) This model was folded using the technique of box pleating. It's based on an 18 Read more
Four Legs Dragon by Shabbir Bandukwala (Karachi , Pakistan) This dragon i have learn thought internet hope you like it. Read more
New Flower III by Shabbir Bandukwala (Karachi , Pakistan) Hi it new flower hexagon basic flower. Read more
New Flower II by Shabbir Bandukwala (Karachi , Pakistan) HI my new flower hexagon basic six petal. Read more
Caça F-22 raptor Fighter by Nuno Silva (Ribeira Grande, Açores, Portugal) Esse é um F-22 raptor, um dos melhores caças Read more
Jesus na Cruz / Jesus in the Cross by Nuno Silva (Ribeira Grande, Açores, Portugal) Este modelo foi criado por Read more
Paper Peacock by Mithra (India) This was done by Mithra, with the help of Tissue paper, color and gum Read more
Moto de Água - A Water Bike by Nuno Silva (Ribeira Grande, Açores, Portugal) Uma moto de água feita a Read more
Samurai Helmet Beetle by Romie Halabaso (Philippines) This model is folded starting with a waterbomb base. You can also find Read more
Sea Urchin by Shabbir Bandukwala (Karachi , Pakistan) i have learned it from web. need 24 paper for upper part Read more
New Six Petal Flower by Shabbir Bandukwala (Karachi , Pakistan) I have created a new six petal flower with hexagon Read more
Stag Beetle by Romie Halabaso (Philippines) I hope you like it. To view more of my original origami creations, visit Read more
Origami Crown and Scepter (Holy Ghost Festivals Azores) by Nuno Silva (Ribeira Grande, Açores, Portugal) This a crown and scepter Read more
Dinosaur by Romie (Philippines) I hope you like it. To see more of my original origami creations, visit http://romigami.wordpress.com Read more
Lizard by Romie Halabaso (Philippines) I hope you like it, and if you do, I invite you to visit my Read more
Funny Bunny by Igor (Osijek,Croatia) Funny Read more
Angel with Hood by Romie Halabaso (Philippines) Visit my origami blog at http://romigami.wordpress.com Read more
Dollar Bill - Origami Compound of Five Tetrahedra by Edward Holmes (Stone, Staffordshire, UK) This is my second attempt at Read more
1st Modular Swan by Wendy (Montreal) My first attempt at a modular model. Enjoy. Read more
Buckyball-Star by Groovygami (Hamburg, Germany) Hi. I'm very new to Origami, but i want to send you a picture of Read more
8 Point Star by A Shahrokhi (Teh, Iran) Designed with 8 rectangular sheets. Read more
Puppet Kirigami by Ariully (Indonesia) This my pattern kirigami. Read more
Star by Philo Dachi (Jakarta, Indonesia) Easy star made by unfolding a frog base Read more
My Mini-Jet Paper Airplane by Stan Soroken (Salinas, California) This paper airplane measures nose to tail 5.5 inches and has Read more
Paper Plane 2 by Stan Soroken (Salinas, California) I would like to collaborate with someone knowledgeable in diagramming origami for Read more
Lozenge Giftbox by Shahrokhi (Tehran, Iran) Designing this lozenge giftbox with 4 rectangular sheet of paper.a3 a4. Read more
Monkey by Jose Reynoso (San Jose, CA) I have more than 90 origami figurines, I have a lot of pictures Read more
Colosseum by Ariully (Indonesia) Read more
2 Elephants by Jose Reynoso (San Jose, CA) If you are interested to see all my origami email me at Read more
Doggie by Jose Reynoso (San Jose, CA) I can make more than 90 different origami figurines if you are interested Read more
Cat by Jose Reynoso (San Jose CA,) This cat is unique. Read more
Chair's Kirigami by Ariully (Indonesia) Inspired by the chairs of wood carving. Read more
Bat by Romie Halabaso (Philippines) I folded this model starting with the pinwheel base. More of my original origami creations Read more
Pop Up Flower by Ariully (Indonesia) This pop up kirigami flower. It's my job. Read more
Kirigami by Ariully (Banjarnegara, Central Java, Indonesia) Read more
Rainbow of Love by BJ (Gaithersburg, MD) This hanging design was given to someone who is ill as a present. Read more
Pteranodon by Romie Halabaso (Philippines) A Pteranodon is a prehistoric reptile related to dinosaurs. I folded this model of the Read more
New Design Paper Plane by Stan Soroken (Salinas, California, USA) The photo is of one of my new design paper Read more
Cetiosaurio by Edgar (Hidalgo, Mexico) espero que les agrade esta figura yo mismo la cree,solo tengo 12 años y creo Read more
Neogami Origami Jewelry by Maggie Krawczyk (Toronto, Ontario, Canada) About The Artist: Maggie Krawczyk I have always loved origami, and Read more
Jar of Stars-RW&B by Don () After learning about the Wishing Star model, I emptied a plastic peanut butter jar Read more
Geneva Box by W.Y. (Wa, USA) Recently folded the Geneva Box using 8.5"x11" paper. I went on Hexagon/how to, wikipedia Read more
Baby Dragon by Romie Halabaso (Philippines) This model is the fifth transformation of my fish base dragon model. For more Read more
My Dragon by Romie Halabaso (Philippines) This dragon model was folded starting with a fish base and using the technique Read more
Bull by Romie Halabaso (Philippines) This model was inspired by Jun Maekawa's wild boar design in his book 'Genuine Origami.' Read more
Migration of Dinosaurs by Mateus Saito (Sao Paulo - Brazil) These dinosaurs were made by following the instructions in John Read more
Modular Ring by A. Shahrokhi (Iran) Designed this ring with 18 square of paper. Read more
Modular Origami by A. Shahrokhi (Iran, Tehran) Designing this modular ring with 8 rectangular sheet of paper size a5 a6 Read more
Mandarin Duck by Romie Halabaso (Philippines) This model is folded starting with a blitzed waterbomb base. Read more
Modular Doll by A. Shahrokhi (Iran) Read more
Boar by Romie Halabaso (Philippines) This model is folded using a 6" x 6" paper and starting with a kite Read more
Hippopotamus by Unknown () The image is from Google images Read more
Turtle by Romie Halabaso (Philippines) This model shows the two sides of the paper: the shell show the colored or Read more
Revealed II Star Flower by Shabbir Bandukwala (Karachi, Sindh, Pakistan) I have revealed ball of origami. And I have new Read more
Rat by Yiyang (Singapore) Eric Joisle's Rat, folded from one piece of square foil paper. Diagrams available from www.ericjoisel.com. Read more
Samurai Helmet Beetle (V.2A) by Yiyang (Singapore) I designed this Samurai Helmet Beetle. It is folded from one piece of Read more
Butterfly by Romie Halabaso (Philippines) This butterfly model is folded using a thin rectangular paper with the two sides having Read more
Sun by Shabbir Bandukwala (Karachi, Sindh, Pakistan) I have learned from the origami book and make this sun. Read more
A New Flower by Shabbir Bandukwala (Karachi, Sindh, Pakistan) This flower is one of the first origami models I have Read more
Eight Petal Flower by Shabbir Bandukwala (Karachi, Sindh, Pakistan) New Eight petal flower created by me. Read more
Flapping Crane by R.S. (USA) Read more
Samurai Helmet by Romie Halabaso (Philippines) This is my version of the 'kabuto', o Japanese samurai helmet. The folding begins Read more
Rose by Alale Kavoosi (Tehran, Iran) Read more
Snoopy by Romie Halabaso (Philippines) I call this dog model 'Snoopy' because it resembles the popular black-eared dog from George Read more
Parrot by Romie Halabaso (Philippines) This parrot model is folded beginning with the Japanese or third-fold pinwheel. Read more
Owl by Romie Halabaso (Philippines) This is a very simple owl model. I folded this starting with a preliminary base. Read more
Mule by Romie Halabaso (Philippines) This mule model is folded starting with a waterbomb base. Read more
Easy Dove by Romie Halabaso (Philippines) This is an easy dove origami. It is completed in less than 12 folds.Looks Read more
Gift Box by Romie Halabaso (Philippines Philippines) This model is folded from a rectangular paper, about 6" x 10". It Read more
Box by Romie Halabaso (Philippines) This box model starts with a bird base. Read more
Octagonal Tato by Romie Halabaso (Philippines) This octagonal tato model is folded from a square paper, no cutting. The double Read more
Coaster by Romie Halabaso (Philippines) This coaster model is folded from one single square paper. No cutting. Read more
Buckyball by Thomas Leung-Tack (Canada) This is a buckyball made of 60 units. Read more
Boat by Romie Halabaso (Philippines) This boat model begins with a preliminary base. Read more
Toucan Bird by Romie Halabaso (Philippines) This is a variation of the traditional origami bird. Read more
Paper Bill Dove by Unknown () This dove model, which is small, is folded from a Philippine 20-peso bill. Read more
Star by Abbas Shahrokhi (Iran) Been designing this model with 4 sheet of paper. Read more
Kamizumo by Thomas Leung-Tack (Canada) The kamizumo is a traditional Japanese game who made its first appearance at the Edo Read more
Pegasus by Thomas Leung-Tack (Canada) It's a pegasus in the Works of Satoshi Kamiya. Read more
Tato-Box by Romie Halabaso (Philippines) This tato model, when opened, becomes a box. Read more
Plesiosaurio by Edgar (Mexico) miren un plesiosaurio Read more
Gato by Edgar (Mexico) Read more
Flor de Loto (Bicolor) by Edgar (Mexico) Read more
Tato 2 by Romie Halabaso (Philippines) My second tato model. Read more
Tulipan by Edgar (Mexico) hola soy de mexico y para que bean que igual somo buenos en el origami miren Read more
Envelope by Romie Halabaso (Philippines) One day, I'm gonna write my boss a letter to tell her how I feel; Read more
The Yellow Bird by Thomas Leung-Tack (Canada) I folded this model by the Works of Satoshi Kamiya book. This is Read more
Tato by Romie Halabaso (Philippines) This is a simple tato model, made by first folding the paper into thirds horizontally Read more
Gift Box by Romie Halabaso (Philippines) This is a modular origami model of a simple gift box, made up of Read more
Dish by Romie Halabaso (Philippines) This is a simple dish model, created starting with the square pinwheel letter envelope origami Read more
Origami Earring Webstore by Andrea Magyar (Budapest, Hungary) Visit my Origami Earring Webstore ! Handmade, unique jewelry. Free shipping. http://www.freewebstore.org/Origami-Earrings-Store Read more
Small Box by Romie Halabaso (Philippines) This model resembles what is called the Japanese box but is folded out of Read more
Flô di Chuvê by Mkrone (R.J. Brasil) Origami modular, criado por MKrone Read more
Paper Bill Origami Butterfly with Big Wings by Romie Halabaso (Philippines) This is my second model of a paper bill Read more
Origami Stylized Butterfly by Evi Binzinger (Germany) Read more
3 Piece Spinning Top by Kathy Knapp (Peoria, Illinois, USA) I used 3 pieces of 12 inch scrap-booking paper. The Read more
Origami Ball by Yones (Persia) I made this model with 30 rectangular sheets of paper. Size of rectangle paper is Read more
Paper Bill Origami: Rabbit by Romie Halabaso (Philippines) This origami is folded out of a 20-peso bill. Read more
Sponge Menger (Level 2) by Yones (Persia, Iran) I made this Sponge Menger with business cards. Read more
Cobra by Kelly () Sorry it's on white paper. I didn't have any grey or black so use your imagination. Read more
Flower Set by Monika C (Jablonec nad Nisou, Czech Republic) Read more
Andrea´s Roses by Monika C (Jablonec nad Nisou, Czech Republic) Andrea´s Rose folded form chyiogami Japanese paper with silver plated Read more
Bowl: 2 variations by Romie Halabaso (Philippines) These bowl were folded out of the Japanese pinwheel model. Great as peanut Read more
Hilbert Cube by Abbas Shahrokhi (Tehran, Iran) A topological space named Hilbert Cube (a German mathematician) I made this model Read more
Origami Tower by Abbas Shahrokhi (Tehran, Iran) I made this origami model with 195 sonobe units. It has a pentagonal Read more
Origami Lilies by Neha (India) I have made these simple and colorful lilies for decoration. Read more
Origami Rose by Evi Binzinger (Germany) My rose folded with soft, handmade paper from India. I used one uncut square Read more
Origami Rose by Evi Binzinger (Germany) My rose, folded with soft, handmade paper from Thailand. Read more
Hummingbird by Romie Halabaso (Philippines) A simple model of a hummingbird. How to fold the head was very challenging. The Read more
Origami Modular by Abbas Shahrokhi (Tehran, Iran) I made this modular origami with 216 sonobe unit! It is like a Read more
Tron Legacy Light Cycle by Thomas Leung-Tack (Canada) I made this model for the movie Tron Legacy. I invented the Read more
Spiral Giftbox by Abbas Shahrokhi (Tehran, Iran) I made this spiral box. No glue used. Read more
Menger Sponge (level 2) by Abbas Shahrokhi (Tehran Iran) I made this model of menger sponge cube with 1152 sonobe Read more
Butterfly by Romie Halabaso (Philippines) I made this paper money origami butterfly, while waiting for the ordered dinner meal in Read more
Origami Tree by Jones (Persia) I drew this tree on the wall and made whole of bunch of origami models Read more
Waterbomb Fish by Romie Halabaso (Philippines) This is simply a variation of the waterbomb. Read more
Whale by Romie Halabaso (Philippines) This whale or big fish model is folded starting with the pig base. Instead of Read more
Rabbit by Romie Halabaso (Philippines) This model is easy to fold, starting with a waterbomb base. The ears are formed Read more
Family Vases by Abbas Shahrokhi (Iran, Tehran) I folded these vases in 2006. Read more
Bird on a Mat by Romie Halabaso (Philippines) This model is folded from a single sheet of square paper, starting Read more
Grass by Romie Halabaso (Philippines) This model was folded starting with a bird base. If the four grass blades are Read more
Horse by Romie Halabaso (Philippines) This model is made of one square paper, 6" x 6". The folding starts with Read more
Shuriken Origami by Yones (Persia) I created this ninja star with 4 triangular sheet of paper from a4 rectangle paper. Read more
Gift Box by Abbas Shahrokhi (Iran) I folded this box two years ago. Read more
Flies by Romie Halabaso (Philippines) These small fly models are folded starting with the waterbomb base. Read more
Angel by Yones (Rersia) I folded this angle from one sheet of soft paper. Created and designed by Neal Elias Read more
Cross by Romie Halabaso (by Romie Halabaso) This is an attempt at lotto ticket origami. The model here is made Read more
Small Cube by Romie Halabaso (Philippines) After learning to fold the old Japanese pinwheel model called Menko, I joined four Read more
Dodecahedron by Shahrokhi (Iran, Tehran) I folded this model of polyhedron from Tomoko Fuse's book Unit Polyhedron Origami. Making the Read more
Dragon by Romie Halabaso (Philippines) This origami is folded out of the bird origami base. Read more
Letter Envelope (Butterfly) by Romie Halabaso (Philippines) This origami was folded out of an A4 paper. The design resembles a Read more
Modular Origami by Shahrokhi (Tehran, Iran) I folded this model of modular origami from Tomoko Fuse's book Unit Polyhedron Origami. Read more
Box by Romie Halabaso (Philippines) This origami box was folded from a rectangular paper, the standard 8.5"" x 11" art Read more
Flying Goose by Romie Halabaso (Philippines) This very simple and easy origami is folded out of a small square office Read more
Eight-Pointed Star by Romie Halabaso (Philippines) This origami is done by flattening the traditional star box and making some adjustments. Read more
Frog by Romie Halabaso (Philippines) A simple frog, with rear legs Read more
Menger Sponge (Level 1) by A.S (Persia) I made this model of Menger Sponge with 72sonobe units and made this Read more
Turtle by Romie Halabaso (Philippines) A relatively easy-to-fold origami using a square art paper. It has a pair of folds Read more
Golden Venture Swan by Ellen (Salisbury) This was my first attempt at Golden Venture folding and I am reasonably impressed. Read more
Pyramide (Pentahedra) by Abbas Shahrokhi (Iran) I made this model of pyramid . Unit is designed by Mio Tsugawa and Read more
Crane Box by Romie Halabaso (Philippines) This is a simple variation of the traditional star box. Read more
Airplane Model 2 by Romie Halabaso (Philippines) This is another airplane model folded out of a 50-peso Philippine money bill. Read more
Airplane by Romie Halabaso (Philippines) This model was folded from a Philippine money bill, particularly a 100-peso bill. Read more
Iso Butane CH-CH3-CH3-CH3 (C4H10) by Abbaas Shahrokhi (Iran Tehran) With Tornillo units, you can make chemical molecules. I invented a Read more
Peace Star by Abbaas Shahrokhi (Tehran, Iran) I have been designing this star with six square sheets of paper for Read more
Letter Envelope by Romie Halabaso (Philippines) This is a very simple and easy-to-fold letter envelope. It is actually more appropriately Read more
F-Zero Blue Falcon by Thomas Leung-Tack (Canada) It's the famous Blue Falcon in the video game series F-Zero. I folded Read more
Chain or Linked Squares by Romie Halabaso (Philippines) This chain origami is made of eight (8) small square papers, or Read more
Ball by Romie Halabaso (Philippines) This origami is based on a traditional or indigenous palm weaving model which I used Read more
Star by Abbaas Shahrokhi (Tehran, Iran) I made this model of a star. This unit origami was designed by Winson Read more
Business Card Holder by Phillip Bonner (Goolwa South Australia) I searched for a Business Card Holder and found one by Read more
Rose by Romie Halabaso (Philippines) This is folded from a box origami. Read more
Mini or Desktop Picture Frame by Romie Halabaso (Philippines) This origami made using the famous, traditional Yakko folding technique. Read more
Stephen's Owl by Stephen Watson (Leyland, Lancashire UK) 535 venture folded units are used in this model. Unlike most venture Read more
Box by Abbas Shahrokhi (Iran) I folded this box with two rectangle paper for lid and two rectangle paper for Read more
Rose by Romie Halabaso (Philippines) This is folded from a box origami. Read more
Pyramid Box by Evi Binzinger (Muenster/Germany) Origami Pyramid Box folded from one sheet of paper by Evi Binzinger. Crease Pattern Read more
Double Leaf Ornament by Kristopher (Arizona) This is a perfect ornament for Christmas! See more Christmas ornaments here. Read more
Star Box by Evi Binzinger (Muenster/Germany) Star Box created and folded by Evi Binzinger from a single square piece of Read more
Triangular Dipyramid Polyhedron by Abbas Shahrokhi (Tehran, Iran) Read more
Triceratops by Abbas Shahrokhi (Tehran, Iran) I folded this model for an exhibition. Model created by Jerry Harris, diagram found Read more
Hexane CH3(CH2)4 CH3 by Abbas Shahrokhi (Tehran, Iran) I folded this hexane model with Tornillo units. CH3-CH2-CH2-CH2-CH2-CH3 Read more
Octahedral Polyhedron by Abbas Shahrokhi (Tehran, Iran) I made this model with Tornillo unit and made connection unit by myself. Read more
Saar Stars from Pentagons by Kathy Knapp (Peoria, Illinois, USA) Large Saar Star is from tissue foil. Small one from Read more
Origami Xmas Tree by Beverly Robinson (So. PortlandMaine) These are a couple of Xmas trees I made....Beverly Read more
Flat Origami by A.S. (ir) I folded this model from an equilateral triangle. Read more
F-22 Raptor by Thomas Leung-Tack (Canada) I folded this model by the origami tanteidan convention 13 Enjoy it! Read more
Origami Model by Abbas Shahrokhi (Iran) I folded this model without diagram or instruction. There's no name for that: this Read more
Vase by Amir Hossein (Iran) Vase made with Chinese Paper Units. Read more here. Read more
Boy and Girl by Abbas Shahrokhi (Iran) I folded these models in October, 2008 using small triangular units. Read about Read more
A Few Hundred by Stanley (Quebec, Canada) A few hundred origami models including Rabbits, Swans, Kangaroos, Dinosaurs, Lions, Giraffes, Ducks Read more
Pegasus by Abbas Shahrokhi (Iran) I folded this model of a Pegasus from Robert Lang's book, Origami Design Secrets. Read more
Coaster (octagon) by Romie Halabaso (by Romie Halabaso) This model is made up of eight units, joined together without using Read more
Sea Turtle by Shahrokh (Persia) This sea turtle is from Robert Lang's Origami Design Secrets. I have not yet found Read more
A Few Animals by Stanley (Montreal, Quebec, Canada) Mostly bunnies but made a few other animals: lion, penguin, peacock, dinosaurs, Read more
Iris Flowers (Purple-variety) in a Flower Pot by Justin Seratte (San Diego, CA, USA) I did this for a friend Read more
Cubohemioctahedron by Justin Seratte (San Diego, CA, USA) I was actually just testing out my digital camera to see how Read more
Origami Butterfly Bracelet by Christine (Stoughton, WI) I love this overstated origami butterfly bracelet! I enjoy making one of a Read more
Various Polyhedra by Adam G (Newmarket ON Canada) Made with 30 pieces of paper each. Read about modular origami here Read more
Napkin Rose by Mike K (USA) This rose napkin is more of a round spiral rather than the leaf version. Read more
Origami Horse Earrings by Adam M (Raleigh NC) I made some like these for a friend who has horses. Origami Read more
Robot by Thomas (Canada) It's a robot designed by Norio Torimoto. I designed the pincer and the sword. Read more
Origami Polyhedron by Abbas Shahrokhi (Iran) I folded this work in July, 2010 with 720 tornillo units. It is like Read more
Origami Dragon by Ifrah Mateen (Karachi, Pakistan) This is an origami dragon. The folding near the end is a bit Read more
Fire Bird by Ifrah Mateen (Karachi, Pakistan) It is paper graphic type of quilling art. See quilling instructions here Read more
Rainbow Vase by Abbas Shahrokhi (Tehran, Iran) This is a Rainbow Vase. First made in July, 2007. See more about Read more
Space Ship by Abbas Shahrokhi (Tehran, Iran) Space Ship made with simple triangular units. See more about this type of Read more
Money Heart with Wings by Hong Tam (Saigon) Read more
Origami X-Wing by Ifrah Mateen (Karachi, Pakistan) I made this origami X-wing the day after an exam. Folding its wings Read more
Origami Flowers by Louise Khaw (Singapore) These Origami flowers are simple & easy to fold. The small box was made Read more
5 Intersecting Tetrahedra by A. Gerth (Newmarket, Ontario, Canada) I love to fold! Five Intersecting Tetrahedra (FIT) was created by Read more
Dollar Bill Cross With Inscription by Charles Bast (Milwaukee WI USA) An original self-locking piece created by Charles Bast. I Read more
Bast Star by Charles Bast (Milwaukee WI USA) Original origami star created by Charles Bast using a dollar bill no Read more
Indian Currency Bike Dollar Bill Origami by Noman M A Haji (Chennai) A motor bike very cutely designed and folded Read more
Origami of "Gateway of India" by Noman M A (Chennai) Origami paper-craft made with currency from India. This is a Read more
Bast Star Ball by Charles Bast (Milwaukee WI USA) Twelve interlocking Bast Star's are used to create this original 3D Read more
Mini Crane by Adam Beardall (United States, Co) This is a traditional crane that I folded, it is about a Read more
European-style Dragon by William Slade (Salt Lake City, Utah, United States) This European-style dragon is made from a double bird Read more
2010 Origami Calendars By: Ksenia, Moscow, Russia Made these great origami calendars for 2010! Star Calendar, Pentagonal Calendar, and Dodecahedron Read more
