Better images of Cicada Nymph by Toast Boy (Alpharetta, Ga) Better images of my Cicada Nymph model
Author: Staff
Cicada Nymph by Toast Girl
Cicada Nymph by Toast Girl (Alpharetta Ga) Made with half a square
Robin Star by Govind Kulkarni
Robin Star by Govind Kulkarni (Hyderabad, Telangana State, India) This is designed by Maria Sinayajaya
Supersized UFO magic Star by Nicolas
Supersized UFO magic Star by Nicolas (Olive Branch, Mississippi, USA )
Little Rose Kusudama by Suhail Skalli
Little Rose Kusudama by Suhail Skalli (South Africa) Instagram Folded by Suhail
3 Tulips, 2 Twist Flowers, 1 Rose Bowl by Geronimo
3 Tulips, 2 Twist Flowers, 1 Rose Bowl by Geronimo (USA) Hope you enjoy flowers!
Chaos Theory Tessellation by Stacie
Chaos Theory Tessellation by Stacie (NJ, USA) This is a tessellation that I designed and folded. It utilizes many shapes and techniques. I posted a basic crease pattern for those who wish to attempt folding it. http://origami.alcoholicpoet.com/2019/03/chaos-theory-origami-tessellation.html
Mermaid by Jeramy
Mermaid by Jeramy (Neptune) 3500 pieces of .5 inch by .25 inch (1.27 cm X 0.635 cm) pieces of paper
5 Feather Peacock by Stanley
5 Feather Peacock by Stanley (Mississauga, Ontario, Canada) Hard to describe this 3D model…it have three tail feathers but have 5 designs in them.
Big 3D Swans by Stanley
Big 3D Swans by Stanley (Mississauga, Ontario, Canada) Used 1/8 size paper for these swans…they’re huge, as big as a teapot. Big and Small Spread Wings Swans Big, Medium and Small Swan
Dinosaurs by Stanley
Dinosaurs by Stanley (Mississauga, Ontario, Canada) Dragons of dinosaurs….your pick.
Orange Cat by Stanley
Orange Cat by Stanley (Mississauga, Ontario, Canada) This orange cat looks like my orange tabby cat.
Tropical fishes by Stanley
Tropical fishes by Stanley (Mississauga, Ontario, Canada) I went on a 3D fish building craze…
Big Scorpion by Stanley
Big Scorpion by Stanley (Mississauga, Ontario, Canada) Used 1/16 size paper for this model. I put bend plastic films (Plastic juice container) inside the joints (Connections to the body) of the arms of the pincers, and the two front and rear legs to make the model more sturdy. Big and small scorpions
Red Baron Tri-Wing Plane by Stanley
Red Baron Tri-Wing Plane by Stanley (Mississauga, Ontario, Canada) This was a pretty big project…over 1,200 triangular pieces. The body of the plane is the size of a large corn. All the wheels and propeller spins.
Big Owls by Stanley
Big Owls by Stanley () Made four of them, all with 1/8th size paper/triangles….and card stock paper as regular paper is not still enough for big models. They’re about 7″ tall.
Twisty Dragon by Stanley
Twisty Dragon by Stanley (Mississauga, Ontario, Canada) Glued it section by section and holding each section in their curve until the glue dried.
Tank by Stanley
Tank by Stanley (Mississauga, Ontario, Canada) Mississauga, Ontario, Canada
Big Marill Pokemon by Stanley
Big Marill Pokemon by Stanley (Mississauga, Ontario, Canada) Used 1/8 size card stock paper to make this big Marill Pokemon…regular 24 lb paper will not be as stiff (Good for 1/32 size “Triangles though”…this card stock paper is rated at 65 lbs. Used three 1/32 size black paper for its mouth, and 3 per eye.… Continue reading Big Marill Pokemon by Stanley
Mudkip Pokemon by Stanley
Mudkip Pokemon by Stanley (Mississauga, Ontario, Canada) First try at it…came out to be pretty good. Next time I’ll make a bigger head.
Big Torchic Pokemon by Stanley
Big Torchic Pokemon by Stanley (Mississauga, Ontario, Canada) Did a few 1/32 size Torchic Pokemons…this one is using 1/8 size paper, it’s about 8″ tall, the collar feathers are 1/32 size and the beak, legs and claws are 1/32 paper cut smaller. Used card stock paper for head and body to make it stiffer. The… Continue reading Big Torchic Pokemon by Stanley
Big Pikachu Pokemon by Stanley
Big Pikachu Pokemon by Stanley (Mississauga, Ontario, Canada) Use 1/16 size paper to make the big Pikachu Pokemon. Big, teenager and baby Pikachus
2nd Kusudama Flower Ball by Stanley
2nd Kusudama Flower Ball by Stanley (Mississauga, Ontario, Canada) Second one in a span of five days…this one consisted of 40 flowers. Used 6″ x 6″ double-sided colour paper (Different colours on each side)….so four of the pedal tips have different colours than the interior.
1st Kusudama Flower Ball by Stanley
1st Kusudama Flower Ball by Stanley (Mississauga, Ontario, Canada) Used 6″ x 6″ origami paper…wanted to use smaller paper but didn’t have any and I didn’t want to spend time reducing the size. Six pedals per flower…12 flowers, wanted to assemble the one with eight flowers but it was too tight….so folded 72 pedals…not hard… Continue reading 1st Kusudama Flower Ball by Stanley
Origami – Wingull – Pokemon by Emanuel Lucho
Origami – Wingull – Pokemon by Emanuel Lucho (Veracrz, Mexico) I made this little guy, one pokemon bird.
Tribute to The Twin Towers by Stanley
Tribute to The Twin Towers by Stanley (Mississauga, Ontario, Canada) Nine year old Sophia started it!!! She assembled 99% of the taller cylinder and I completed it. We were trying to see how high it can go…but it was too high and easy to tumble. So, I started a new cylinder…and Sophia did only 1%… Continue reading Tribute to The Twin Towers by Stanley
3D Red Dragon by Stanley
3D Red Dragon by Stanley (Mississauga, Ontario, Canada) Used Christmas wrapping paper…which is a bit thin and easy to tear. Folded the pieces (1/16 size) 3 years ago, finally decided to assemble the dragon. Not a hard model….only 630 pieces…but twisting the body into a S shape vertically and horizontally took some time, did it… Continue reading 3D Red Dragon by Stanley
Charizard Pokemon by Stanley
Charizard Pokemon by Stanley (Mississauga, Ontario, Canada) Took me over 6 hours to assemble and glue Charizard…used 710 triangular pieces. A hot glue gun was used to attach the arms, legs, wings, head and tail.
Big and Small 3D Butterflies by Stanley
Big and Small 3D Butterflies by Stanley (Mississauga, Ontario, Canada) The big ones are made with 1/32 size paper and the small ones are made for 1/64 size paper…much harder and challenging to fold.
Canada 150th Anniversary Big and Small Spread-Wings Swans by Stanley
Canada 150th Anniversary Big and Small Spread-Wings Swans by Stanley (Mississauga, Ontario, Canada) Made a bunch of the small spread-wings swans to be given away to my niece’s teachers at the end of the school year. Made 14 of them…and as a bonus I used the Canadian flag colours to celebrate last year’s Canada 150th… Continue reading Canada 150th Anniversary Big and Small Spread-Wings Swans by Stanley
Japanese Brocade in Gold Foil Earrings by Grace M
Japanese Brocade in Gold Foil Earrings by Grace M (Australia ) Japanese brocade by Minako Ishibashi made into earrings using gold foil paper.
Origami Pentagonal Spinning Star by Masoudhosseini
Origami Pentagonal Spinning Star by Masoudhosseini (Tehran, Iran) origami pentagonal spinning star designed by: Masoud Hosseini on December,2017 diagrammed by: reza sarvi its made by pentagon paper. Instagram:@Masoud.origami
Origami Simurgh by Reza Sarvi
Origami Simurgh by Reza Sarvi (Iran-Shiraz) Simurgh is the name of a mythical-legendary Iranian figure. He plays an important role in the stories of Shahnameh. Its place is mythical mountain rug. Wise and wise and knows the hidden secrets. Symphony notation with complex structure; Legendary chicken with peacock tail, eagle body and dog head and… Continue reading Origami Simurgh by Reza Sarvi
Canada 150th Anniversary Swans by Stanley
Canada 150th Anniversary Swans by Stanley (Mississauga, Ontario, Canada) Made a couple of Red and White swans to celebrate Canada’s 150th year as a united country. Not glued yet and no googly eyes…using them as models to make more later. 150th Anniversary White Swan Canada 150th Year Swans
Origami Ostrich by Farshid Sobhani
Origami Ostrich by Farshid Sobhani (Tehran, Iran) this is origami Ostrich folded with square paper 40 gms folded by farshid sobhani site:www.oriran.ir insta:origamisobhani insta:origami_oriran telegram:@oriran
Origami Tiny Rabbit by Farshid Sobhani
Origami Tiny Rabbit by Farshid Sobhani (Iran Tehran) This is tiny rabbit folded with a square paper 40gms. Folded by Farshid Sobhani Site: www.oriran.ir Insta: origamisobhani Insta: origami_oriran Telegram: @oriran
F-18 Hornet Fighter Jet Plane by Farshid Sobhani
F-18 Hornet Fighter Jet Plane by Farshid Sobhani (Iran-Tehran) F-18 Hornet fighter jet plane Fold by farshid sobhani with one dollar
Money Elephant by Hong Tam
Money Elephant by Hong Tam (Saigon)
Money Fox by Hong Tam
Money Fox by Hong Tam (Saigon)
Money Butterfly by Hong Tam
Money Butterfly by Hong Tam (Saigon)
Damavand Volcano by Reza Sarvi
Damavand Volcano by Reza Sarvi (Shiraz-Iran) Mount Damavand is the 12th most prominent peak in the world, and the second most prominent in Asia after Mount Everest. It is the highest volcanic mountain in Asia, and part of the Volcanic Seven Summits mountaineering challenge. Damavand has a special place in Persian mythology and folklore. It… Continue reading Damavand Volcano by Reza Sarvi
1st Snapology project – Egg by Stanley
1st Snapology project – Egg by Stanley (Mississauga, Ontario, Canada) First one…took about 4 hours to complete…and I did use a bit of glue so the whole egg don’t break apart. It’s about 4″ wide.
Origami Zahhak by Reza Sarvi
Origami Zahhak by Reza Sarvi (Iran-Shiraz) This is a model of persian legend from Ferdowsi’s Shahnameh.Zahhak was a king kissed by the devil on his shoulders and on kisses devil place two snakes grow.Snakes fed the human brain. Kaveh revolted against him and his government was destroyed.This pattern all diagramed and designed by myself. I… Continue reading Origami Zahhak by Reza Sarvi
Pokemon Kids by Stanley
Pokemon Kids by Stanley (Mississauga, Ontario, Canada) Made some small versions of some 3D Pokemon characters. Used beads for the eyes….their parents had triangular pieces for eyes.
Easter 2017 by Stanley
Easter 2017 by Stanley (Mississauga, Ontario, Canada) Some 3D chicks, eggs and rabbits…just in time for Easter. The white rabbit is just a bit smaller than the other two. Basket of Eggs 6 of 12 chicks 3D Rabbits
Origami Right Triangle Bird by Reza Sarvi
Origami Right Triangle Bird by Reza Sarvi (Iran-Shiraz) I folded and designed this pattern by myself. It’s made by one uncut right triangle paper. It’s took one week to design this. You can download the diagram in Origamiusa.org
Piplup Pokemon and 2 Small Owls by Stanley
Piplup Pokemon and 2 Small Owls by Stanley (Mississauga, Ontario, Canada) Piplup Pokemon used over 800 triangular pieces…I really like the contrasting colours. Made two small owls to accompany Piplup. The owls are slightly different…one used almost 200 pieces while the other one used over 250 pieces. One have talons so the model is slightly… Continue reading Piplup Pokemon and 2 Small Owls by Stanley
Two 1/64th size Butterflies by Stanley
Two 1/64th size Butterflies by Stanley (Mississauga, Ontario, Canada) The 1/32th paper butterflies were huge…slightly bigger than my palm, so I made two smaller ones using different colour schemes and patterns.
Tarantula by Stanley
Tarantula by Stanley (Mississauga, Ontario, Canada) Used 1/64th size paper and it still came out big. The Green Scorpion used 1/32th size paper.
Origami Griffin Capital by Reza Sarvi
Origami Griffin Capital by Reza Sarvi (Iran-Shiraz) This is a model of ancient persia-persepolitian column with double headed Griffin Capital. This pattern all diagramed and designed by me. It’s made by one square paper without cut and glue. It’s took one month to design this diagram.
Vase of Flowers by Stanley
Vase of Flowers by Stanley (Mississauga, Ontario, Canada) Not too bad, not a single flower used a hundred triangular pieces (I avoided the rose and tulip…those 2 used over 120 pieces). 15 flowers in all and about 4 different types. Most were given away by my niece on Valentine’s Day. I’ll make 2 more…
Roselia and Pichu Pokemons by Stanley
Roselia and Pichu Pokemons by Stanley (Mississauga, Ontario, Canada) Making the little roses for Roselia was almost harder than making the whole model. Really proud of Pichu’s head…only a quarter-size hole at the top…I could add a few more triangular pieces and close it completely. Roselia Pichu
Origami Great Cyrus Tomb by Reza Sarvi
Origami Great Cyrus Tomb by Reza Sarvi (Iran-Shiraz)) This is a model of great Cyrus Tomb. This pattern all diagrammed and designed by me. It’s took one month to design this diagram. It’s made by rectangle Kraft paper.
Origami Bull Capital by Reza Sarvi
Origami Bull Capital by Reza Sarvi (Iran-Shiraz) This is a model of ancient persia-pesepolitian column with double headed bull capital. This pattern all diagramed and designed by me. It’s took three months to design this diagram. It’s made by rectangle Kraft paper.
Togepi and Torchic Pokemon by Stanley
Togepi and Torchic Pokemon by Stanley (Mississauga, Ontario, Canada) On a Pokemon roll….my 5th and 6th project; Togepi and Torchic. Togepi is almost 7″ high and 5″ wide, Torchic is 6″ high. Togepi is one piece while Torchic is two pieces with a separate ring of neck feathers and little wings. Togepi Torchic
Pokemon Characters by Stanley
Pokemon Characters by Stanley (Mississauga, Ontario, Canada) Pikachu, Cleffa, PokeEgg, and Marill.
Twin Butterflies by Stanley
Twin Butterflies by Stanley (Mississauga, Ontario, Canada) Added a few more triangular pieces to the extras and made two butterflies.
Green Scorpion by Stanley
Green Scorpion by Stanley (Mississauga, Ontario, Canada) The creep crawler is over 6″ long.
Golden Venture Swans with Spiral Design by Stanley
Golden Venture Swans with Spiral Design by Stanley (Mississauga, Ontario, Canada) Both have open wings with spiral designs. The orange-green one have the spirals go all the way up the wings. The neon pink-blue one have the spirals going up the body and then to the edge of the wings. Spiral all the way
12 Days of Christmas by Stanley
12 Days of Christmas by Stanley (Mississauga, Ontario, Canada) Made 11 swans to add to my first swan over the 2016 Christmas holidays. On the 12th day of Christmas my true love gave to me; 12 swans are singing… Spiral Swan Pink Diamond Swan Contrasting Swans
Three Dollar Eastern Dragon by Andrew Lei
Three Dollar Eastern Dragon by Andrew Lei (Rogers, Arkansas, USA) Modular. Made from three one dollar bills.
Jewelry Box by Shabbir Bandukwala
Jewelry Box by Shabbir Bandukwala (Karachi, Sindh,Pakistan) I made a jewelry box which I have learned from YouTube Origami 172. Lid of the box made with the eight paper, box bounder made with 16 paper, and base with eight paper. Lid of the Box Base of the Box Inside of the Box
Origami Tessellation by Waralow Kami
Origami Tessellation by Waralow Kami (Tehran, Iran) 64 division and triangle grid and rectangle size of paper . design by me
New Version Tulip by Shabbir Bandukwala (Karachi, Sindh,Pakistaon)
New Version Tulip by Shabbir Bandukwala (Karachi, Sindh,Pakistaon) I have created a new version of tulip
2 Tulip 1 New Flower in the Pot by Shabbir Bandukwala
2 Tulip 1 New Flower in the Pot by Shabbir Bandukwala (Karachi, Sindh, Pakistan) 2 Tulip eight petals and one new flower in the centre. Three flower in the pot
Pencil Holder with Foto Frame by Shabbir Bandukwala
Pencil Holder with Foto Frame by Shabbir Bandukwala (Karachi, Sindh, Pakistan) Used two colors of paper sheet six paper has been sued to make this pencil holder.
Pencil Holder by Shabbir Bandukwala
Pencil Holder by Shabbir Bandukwala (Karachi, Sindh, Pakistan) Used four paper to make one pencil holder
Origami Japanese Peacock by Shabbir Bandukwala
Origami Japanese Peacock by Shabbir Bandukwala (Karachi, Sindh, Pakistan) One paper origami peacock publish in Japanese origami magazine
Let there be Dragons!!! by Stanley
Let there be Dragons!!! by Stanley (Mississauga, Ontario, Canada) Well, only one dragon…but with three heads. Took me 4 tries to get it right…first 2 were ok, 3rd was a lot better but the paper ripped a bit at some areas. About 4 hours per dragon. First two I used magazine paper…the next two I… Continue reading Let there be Dragons!!! by Stanley
Flowers, Dragonflies, Butterflies, Lucky Stars and a Cat. Oh my.
Flowers, Dragonflies, Butterflies, Lucky Stars and a Cat. Oh my. by Stanley (Mississauga, Ontario, Canada) Bouquet of flowers in 200 Lucky Stars with dragonflies and butterflies encircling it. Chester the cat dutifully watches over it. There’re 4 types of flowers (Tulip, Bell, Water Lily and another one), 2 types of dragonflies and butterflies.
Pocket For My Pocket by Kevin
Pocket For My Pocket by Kevin (Reno, NV, USA) I made this attempting something else. So I saved it in my wallet for awhile to eventually reverse engineer it and share it… but one day I needed a dollar and that was it. I took a quick pic and vid and into the register it… Continue reading Pocket For My Pocket by Kevin
3D Origami Tiger 2 by Mark
3D Origami Tiger 2 by Mark (south Korea) Tiger 2, be happy!
3d Origami Tiger by Mark
3d Origami Tiger by Mark (South Korea) Tiger
Abstracted Summer V by Patricia C. Coleman
Abstracted Summer V by Patricia C. Coleman (Bloomington, Indiana) I love creasing, folding and forming. Here are other forms I am playing with. The middle image is fabric. When I share what I am learning with others I call it contemplative folding. It has been challenging and fun to decide how to display the finished… Continue reading Abstracted Summer V by Patricia C. Coleman
Money Dachsund by DN
Money Dachsund by DN by DN (USA) I made this little guy folding the front of a peacock on both sides of a two dollar bill.
Money Agave by DN
Money Agave by DN (USA)
Dollar Bill Baskets by DN
Dollar Bill Baskets by DN (USA) I learned to fold these Easter Baskets from this YouTube video. The only improvements I made were to foll the handles to the inside of the basket and fold one of the ends very narrowly as to hide the white stripe that would be at the top of the… Continue reading Dollar Bill Baskets by DN
Origami Cross Bookmarks by Pat Wheeler
Origami Cross Bookmarks by Pat Wheeler (Hot Springs, AR) It has been interesting visiting your site. Thank you.
120 unit Icosidodecahedron by Stephanie Oregon
120 unit Icosidodecahedron by Stephanie K (Oregon, US) This origami is filled with 9 paper cranes, so that the total number of pieces of paper used (129) matches the death toll of the 11/13/15 attacks in Paris. Each sheet of paper has a name written on it. Estimated time spent: ~8 hours over the course… Continue reading 120 unit Icosidodecahedron by Stephanie Oregon
High Tech Paper Plane 2 by Stan Soroken
High Tech Paper Plane 2 by Stan Soroken (Salinas, California, USA) One more of my paper airplane designs.
Cranes by Arnav Bhanwala
Cranes by Arnav Bhanwala (Cleveland, Ohio,USA) This is my creations .I love making Origami.
4 Different Box Cranes by Sophia & Stanley
4 Different Box Cranes by Sophia & Stanley (Mississauga, Ontario, Canada) Added two more different box cranes to the two I already posted earlier. The orange 2-crane box holds the most amount of items, but the cranes are a lot smaller. The pink box crane have the similar narrower base as the green one, so… Continue reading 4 Different Box Cranes by Sophia & Stanley
Rose with Leaves by Romi
Rose with Leaves by Romi (Philippines) This is made of two parts. One is the rose, folded from a 9″ x 9″ pink origami paper. The other is the leaves part, folded from a 4.5″ x 4.5″ green origami paper then attached to the rose. I designed this. For more of my original creations, visit… Continue reading Rose with Leaves by Romi
Pair of Box Cranes by Sophia & Stanley
Pair of Box Cranes by Sophia & Stanley (Mississauga, Ontario, Canada) 6 1/2 year old Sophia helped uncle Stanley make a pair of different box cranes. The blue one have a wider base so it’s more balanced, also it can hold a bit more items (Rings, earrings or peanuts on a banquet table etc.).
3D Dragonflies by Sophia & Stanley
3D Dragonflies by ophia & Stanley (Mississauga, Ontario, Canada) 7 year old Sophia and uncle Stanley made 20 3D Dragonflies to be given out to her friends at her birthday party soon.
3D Small Swan by Sophia & Stanley
3D Small Swan by Sophia & Stanley (Mississauga, Ontario, Canada) My 6 1/2 year old niece Sophia’s first 3D model…a small neon green swan with pink edge. Sophia used 3.5 cm x 5.5 cm paper. Sophia did 75% of the work with some help from uncle Stanley. Included is Sophia’s SWAN and uncle Stanley’s PEACOCK.
Butterfly Jasmine – White Ginger by Delores Humphrey
Butterfly Jasmine – White Ginger by Delores Humphrey (Corbin, Ky.) Inspired by my niece (due in Dec.) Her father is Cuban and trying to find thing to add a Cuban flare to my sisters baby shower i search how to make this as its Cuban national flower. I had no luck finding it. Then I… Continue reading Butterfly Jasmine – White Ginger by Delores Humphrey
3D Peacock with 3 Tail Feathers by Stanley
3D Peacock with 3 Tail Feathers by Stanley (Mississauga, Ontario, Canada) Third 3D project. Had to throw away the first base (Body) I made because the triangular pieces were glued on slanted (My fault…costed me 88 pieces :o(. ) Used colour printing paper cut in 3.5 cm x 5.5 cm sizes. I had to make… Continue reading 3D Peacock with 3 Tail Feathers by Stanley
Origami Mobile by Stanley
Origami Mobile by Stanley (Mississauga, Ontario, Canada) In all the years of paper folding I never bothered to do a mobile…..here’s my first one for my niece Sophia. There’s about 40 creatures: horse, zebra, unicorn, 3 different kangaroos (One with a joey), ducks, angelfish, goldfish swans, penguin, robin, camel, 3 different elephants, seal, 4 different… Continue reading Origami Mobile by Stanley
Penultimate Dodecahedron by Franck Ramaharo
Penultimate Dodecahedron by Franck Ramaharo (Antananarivo, Madagascar) Dodecahedron made from 30 penultimate modules (attributed to Robert Neal).
3D Silver & Purple Chinese Dragon by Stanley
3D Silver & Purple Chinese Dragon by Stanley (Mississauga, Ontario, Canada) My 2nd 3D origami project. This one took a lot longer than the 7″ dinosaur. This dragon is 34″ long and used close to 500 triangular pieces. I used 5cm x 7.7cm gift wrapping paper….the silver paper seem stronger and a bit thicker than… Continue reading 3D Silver & Purple Chinese Dragon by Stanley
3D Dinosaur by Stanley
3D Dinosaur by Stanley (Mississauga, Ontario, Canada) My first attempt at 3D origami. For the purple dinosaur I used 3.5cm x 5cm gift wrapping paper…the claws, tail and horns were silver wrapping paper (It feels thicker then the regular wrapping paper).
Star Ball by Franck Ramaharo
Star Ball by Franck Ramaharo (Antananarivo, Madagascar) Star Ball designed by Tomoko Fuse made from 30 units of A4 paper.
Ant Lion’s Nest by Franck Ramaharo
Ant Lion’s Nest by Franck Ramaharo (Antananarivo, Madagascar) Ant Lions Nest, same unit (30u) but different assembly. Design is attributed to Tomoko Fuse.
3D Origami Minion by Giulia
3D Origami Minion by Giulia (Oregon, US) Recently i made this 3D origami minion and posted a tutorial on youtube for it:) Can you post it here on your page? Here it’s the link: THANK YOU!
Little Turtle Dodecahedron by Franck Ramaharo
Little Turtle Dodecahedron by Franck Ramaharo (Antananarivo, Madagascar) Dodecahedron made from 30 double-sided concave hexagonal units (little turtle units). The design is attributed to Tomoko Fuse. Little Turtle Dodecahedron (concave)
Origami New Tulip 16 Petal by Shabbir Bandukwala
Origami New Tulip 16 Petal by Shabbir Bandukwala (Karachi, Sindh, Pakistan) Make two water bomb base insect second into first one and make tulip diagram after fold cut all corner that close and open all petal one by one it ready.
Origami New Tulip 8 Petal by Shabbir Bandukwala
Origami New Tulip 8 Petal by Shabbir Bandukwala (karachi,sindh,pakistan) Blintz fold tulip fold diagram new version in tulip.
Dinos to Israel by Joyce Aysta
Dinos to Israel by Joyce Aysta (Los Angeles) these 2 dinos are part of a set of 5 that I sent to Israel for and origami show curated by Paul Jackson
5 Dinos by Joyce Aysta
5 Dinos by Joyce Aysta (Los Angeles) These 5 pieces are on their way to the Jaffa Museum in Israel for a show curated by Paul jackson Dueling Dinos Mammuthus columbi Stegosaurus stenops
Curved Creases by Joyce Aysta
by Joyce Aysta (Los Angeles) Artist Statement I am a self-taught paper artist who creates realistic, rectilinear and monochromatic origami architecture greeting cards. I have now embarked on a new body of work ~ abstract, curvaceous and colorful curved creases. For the past 21 years, I created origami architecture greeting cards of significant buildings. In… Continue reading Curved Creases by Joyce Aysta
Curved Creases by Joyce Aysta
Curved Creases by Joyce Aysta (Los Angeles) Artist Statement I am a self-taught paper artist who creates realistic, rectilinear and monochromatic origami architecture greeting cards. I have now embarked on a new body of work ~ abstract, curvaceous and colorful curved creases. For the past 21 years, I created origami architecture greeting cards of significant… Continue reading Curved Creases by Joyce Aysta
Menger Sponge (Level 1) by Franck Ramaharo
Menger Sponge (Level 1) by Franck Ramaharo (Antananarivo, Madagascar) Level 1 Menger Sponge made from Tomoko Fuse square module (72).
Baskeet by Romi Halabaso
Baskeet by Romi Halabaso (Philippines) This is my first original origami creation for 2015. Happy New Year to all! You can see all of my origami models at http://www.wordpress.com/romigami
Business Card Holder by Phillip Bonner
Business Card Holder by Phillip Bonner (Goolwa South Australia) I searched for a Business Card Holder and found one by Romie Halabaso that would suit my needs. But, alas, there were no instructions and frequent attempts at contacting Romie were not answered. Therefore I thought I would create my own and this is them. Romie… Continue reading Business Card Holder by Phillip Bonner
T-39 Paper Plane by Stanley S
T-39 Paper Plane by Stanley S (USA)
Winged Boat by Alexander
Winged Boat by Alexander (Canada) This is a winged boat that I designed for a high school project. 5 stars if you like it!
Master Yoda by Egor
Master Yoda by Egor (Chicago IL) Master Yoda Green =)) I like this model)
Sonobe Stellated Icosahedron by Franck Ramaharo
Sonobe Stellated Icosahedron by Franck Ramaharo (Antananarivo, Madagascar) Stellated Icosahedron made from 30 Sonobe units. The model is also called Small Triambic Icosahedron. Editor’s Note: Instructions to this origami model can be found in the modular origami section of web page.
Mosely Snowflake Sponge Fractal (Level 3) by Franck Ramaharo
Mosely Snowflake Sponge Fractal (Level 3) by Franck Ramaharo (Antananarivo, Madagascar) The design of this fractal is attributed to Dr. Jeannine Mosely. We used approximately 50 000 business card for this Snowflake Sponge. The final model is around 1.50 meters. The folding and the assembly took three weeks involving a dozen of Malagasy maths students.… Continue reading Mosely Snowflake Sponge Fractal (Level 3) by Franck Ramaharo
Jerusalem Cube Fractal (Level 1) by Franck Ramaharo
Jerusalem Cube Fractal (Level 1) by Franck Ramaharo (Antananarivo, Madagascar) The Level 1 Jerusalem Cube is almost similar to the Menger Sponge where each face is ornated by a cross pattern. I use business card for this model.
WXYZ (Intersecting Planes) by Franck Ramaharo
WXYZ (Intersecting Planes) by Franck Ramaharo (Antananarivo, Madagascar) Four Intersecting Triangles made from Tung Ken Lam’s WXYZ module. Editor’s note: Click here for instructions for WXYZ and other modular origami models.
Desert Flower by Hideo Kumayama
Desert Flower by Hideo Kumayama (São Bertardo do Campo-SP-Brasil) Pentagonal paper
Spiked Icosahedron by Franck Ramaharo
Spiked Icosahedron by Franck Ramaharo (Antananarivo, Madagascar) This spiked icosahedron is made with Nick Robinson’s trimodules (30 modules). Editors note: Nick Robinson’s trimodules can be found here. More spikey ball types of origami here
Vann’s 5 Card Pentagonal Hassock by Franck Ramaharo
Vann’s 5 Card Pentagonal Hassock by Franck Ramaharo (Antananarivo, Madagascar) This business card polyhedron is a variant of a cuboctahedron but with a pentagonal top and bottom. The model is attributed to Valerie Vann and is made with 5 units.
Gyroscope Octahedron by Franck Ramaharo
Gyroscope Octahedron by Franck Ramaharo (Antananarivo, Madagascar) Octahedron made with 6 Gyroscope Modules (attributed to Lewis Simon). Editor’s Note: Gyroscope instructions can be found in the modular origami page.
Gyroscope Cuboctahedron by Franck Ramaharo
Gyroscope Cuboctahedron by Franck Ramaharo (Antananarivo, Madagascar) Cuboctahedron made out of 12 gyroscope module. I use 9x9cm paper blocks for this model. Note from editor: The gyroscope module can be found here under Gyroscope by Lewis Simon. the original gyroscope is made with 6 units.
Cosmos Origami by Hideo Kumayama
Cosmos Origami by Hideo Kumayama (São bernardo do Campo-SP-Brasil) Heptagonal Paper
Business Card 4-Pieces Cuboctahedron by Franck Ramaharo
Business Card 4-Pieces Cuboctahedron by Franck Ramaharo (Antananarivo, Madagascar) The design of the 4-pieces cuboctahedron unit is attributed to Valerie Vann. It is very easy to assemble and the final model is very sturdy. Editor’s Note: Click here for more business card origami or more links to Valerie Vann’s work
Mosely Snowflake Sponge Fractal (Level 2) by Franck Ramaharo
Mosely Snowflake Sponge Fractal (Level 2) by Franck Ramaharo (Antananarivo, Madagascar) The design of this beautiful fractal is attributed to Dr Jeannine Mosely. I made this model with business card units. Editor’s Note: Click here to read more about Mosely Snowflake Sponge (scroll to bottom of page), or try smaller business card origami projects.
Six Petals Flower by Hideo Kumayama
Six Petals Flower by Hideo Kumayama (São Bernardo do Campo-SP-Brasil) Hexagonal paper Editor’s Note: More origami flowers here.
Seven Petals Flower by Hideo Kumayama
Seven Petals Flower by Hideo Kumayama (São Bernardo do Campo-Sp-Brasil) Heptagonal Paper Editor’s Note: More origami flowers here
Heptagonal Box I by Hideo Kumayama
Heptagonal Box I by Hideo Kumayama (São Bernardo do Campo-SP-Brasil) Paper size 2:1 Inspiration Shuzo Fujimoto Box
Menger Sponge (Level 2 and Level 3) by Franck Ramaharo
Menger Sponge (Level 2 and Level 3) by Franck Ramaharo (Antananarivo, Madagascar) Level 2 & 3 Menger Sponge made out of 4x7cm business card recovered from paper scraps. The models was folded by Malagasy maths students.
Decagonal Box by Hideo Kumayama
Decagonal Box by Hideo Kumayama (São Bernardo do Campo-SP-Brasil) Paper 15×15
Hexagonal Box Variation by Hideo Kumayama
Hexagonal Box Variation by Hideo Kumayama (São Bernardo do Campo-SP-Brasil) Self Closed Variation Paper Size 7:4 (49×28) Box Size 2:1 (16:8)
Hexagonal Box – Self Closing by Hideo Kumayama
Hexagonal Box – Self Closing by Hideo Kumayama (São Bernardo do Campo-SP-Brasil) Square Paper size 15×15
Octagonal Box – Self Closing by Hideo Kumayama
Octagonal Box – Self Closing by Hideo Kumayama (São Bernardo do Campo-SP-Brasil) Square Paper size 15×15
Dollar Bill Coat Tie by Denny
Dollar Bill Coat Tie by Denny (USA) Coat and Tie made with two $1 bills.
Octagonal Box by Hideo Kumayama
Octagonal Box by Hideo Kumayama (São Bernardo do Campo-SP-Brasil) 2x Square paper Size 15×15 Inspiration Twist Box Shuzo Fujimoto
Heptagonal Box by Hideo Kumayama
Heptagonal Box by Hideo Kumayama (São Bernardo do Campo-SP-Brasil) Paper Size 1:√2 184×260
Eneagonal Box by Hideo Kumayama
Eneagonal Box by Hideo Kumayama (São bernardo do Campo-SP-Brasil) Paper size 2;1 26:13
Hexagonal Box I by Hideo Kumayama
Hexagonal Box I by Hideo Kumayama (São Bernardo do Campo-SP-Brasil) 1. Folding one side of the square paper into 4 parts 2. Folding the other side into 7 parts
Hexagonal Box by Hideo Kumayama
Hexagonal Box by Hideo Kumayama (São Bernardo do Campo-SP-Brasil) 2x Square Paper Size 15×15 Inspiration Shuzo Fijimoto Twist Box
Hexagonal Box with frame by Hideo Kumayama
Hexagonal Box with frame by Hideo Kumayama (São Bernardo do Campo-SP-Brasil) 3x Square paper Size 15×15 Inspiration Masu Box http://vallebird.files.wordpress.com/2014/05/masu.pdf
Octogonal Star Variation by Hideo Kumayama
Octogonal Star Variation by Hideo Kumayama (São Bernardo do Campo-SP-Brasil) Inspiration (Extra Twinkles) Fuse’s Star http://www.prospero78.freeserve.co.uk/diagrams/twinkles.gif
Pentagonal Box I by Hideo Kumayama
Pentagonal Box I by Hideo Kumayama (São Bernardo do Campo-SP-Brasil) Self Closing Paper 15×15
Pentagonal Box by Hideo Kumayama
Pentagonal Box by Hideo Kumayama (São Bernardo do Campo-SP-Brasil) Paper 2:1 (26×13)
Decagonal Box with Lid
Decagonal Box with Lid () Decagonal Box Square paper size 25×25 Lid Rectangular paper size 2:1(26×13) Inspiration Shuzo Fujimoto
Jet Paper Airplane by Stan Soroken
Jet Paper Airplane by Stan Soroken (Salinas, CA USA) A few more of my paper airplane designs.
Heptagonal Star by Hideo
Heptagonal Star by Hideo (Kumayama) Modular Heptagonal Star
Decagonal Star I by Hideo Kumayama
Decagonal Star I by Hideo Kumayama (São Bernardo do Campo-SP- Brasil) Modular Decagonal Star
Simple Origami Bookmark by Kaylee
Simple Origami Bookmark by Kaylee (Ooltewah, TN, USA) I folded it for myself. I used sticky notes. It probably took me ten minutes. The original designer was M. Michaels. I got the diagram from origami-resource-center.com.
Eneagonal Star by Hideo Kumayama
Eneagonal Star by Hideo Kumayama (São Bernardo do Campo – SP-Brasil) Modular Eneagonal Star
Wonder Kusudama by Lidiane Siqueira
Wonder Kusudama by Lidiane Siqueira (Teresina, Piauí, Brasil) Made with 1:2 rectangular paper (3.75 cm x 3.75 cm). Module compound. 60 papers in all. Designed by Lidiane by Siqueira Teresina / Brazil
Decagonal Star (back) by Kumayama, Hideo
Decagonal Star (back) by Kumayama, Hideo (São Bernardo do Campo – Brasil) back decagonal Star
Decagonal Star by Kumayama, Hideo
Decagonal Star by Kumayama, Hideo (São Bernardo do Campo – Brasil) Modular decagonal star
Dinosaur by Aniss Mesli
Dinosaur by Aniss Mesli () A model that took me three weeks to design. It starts with a bird base.
Purple Swan (3D Origami) by Origami Nation
Purple Swan (3D Origami) by Origami Nation () You can find more models on youtube: https://www.youtube.com/channel/UCJVJ5CZYnIhuLFeW4AE_c7A or facebook: https://www.facebook.com/origamination
Small Hearts by Origami Nation
Small Hearts by Origami Nation () You can find more models on youtube: https://www.youtube.com/channel/UCJVJ5CZYnIhuLFeW4AE_c7A or facebook: https://www.facebook.com/origamination
df
df ()
Black Swan by Origami Nation
Black Swan by Origami Nation () You can find more models on youtube: https://www.youtube.com/channel/UCJVJ5CZYnIhuLFeW4AE_c7A or facebook: https://www.facebook.com/origamination
Swan by Origami Nation
Swan by Origami Nation () You can find more models on youtube: https://www.youtube.com/channel/UCJVJ5CZYnIhuLFeW4AE_c7A or facebook: https://www.facebook.com/origamination
3D 3 Petals Flower by Shabbir
3D 3 Petals Flower by Shabbir (Karachi,Sindh,Pakistan) detail comming soon
Literary Leaf Earrings by Unknown
Literary Leaf Earrings by Unknown () Folded for sale from paper from an old book. Each earring is made from 15 leaves. The leaf is a traditional design and these earrings took me about 3 hours to complete.
Kawasaki Rose by Thomas Leung-Tack
Kawasaki Rose by Thomas Leung-Tack (Canada)
Fire Truck with Movable Parts by Charles “Doc” Santee
Fire Truck with Movable Parts by Charles “Doc” Santee ((near) Chicago, IL) Origami Fire Truck Folded from many rectangles of Paper, Cardstock, and Poster Board – NO GLUE The steering when turns the wheels left and right. The Wheels Turn The Main Ladder Rotates and Extends. Santee’s Swivel is used for the steering mechanism and… Continue reading Fire Truck with Movable Parts by Charles “Doc” Santee
Horse by Dalas Dimitris
Horse by Dalas Dimitris (Greece) by Dalas Dimitris. More origami horses here
Pegasus by Dalas Dimitris
Pegasus by Dalas Dimitris (Greece)
Scorpion by Romie Halabaso
Scorpion by Romie Halabaso (Philippines) For this simple box pleated scorpion model, I used one whole sheet of rectangular colored paper. For more of my original origami creations, visit my origami blog at http://romigami.wordpress.com
Origami 3D by Maria Nguyen
Origami 3D by Maria Nguyen (Oklahoma) Happy origami
Crocodilo – Crocodile by NunoSilva
Crocodilo – Crocodile by NunoSilva (Ribeira Grande, São Miguel, Açores, Portugal) Eis outro diagrama que eu criei, esse nem me levou muito tempo, as dobras simplesmente iam aparecendo (“,) Here is another diagram that I created, this one didn’t take me a long time, the folds were simply appearing (“,)
Lovely Art by Shiela Pormilos
Lovely Art by Shiela Pormilos (Iloilo, Philippines) I used to buy books to learn & sometimes only imaginations
Swallows by Romie
Swallows by Romie (Philippines) I came up with these simple origami swallows by doodling with the waterbomb base. The tails are formed by folding two flaps of the base into rabbit ears. To see more of my original origami creations, visit my origami blog at http://www.wordpress.com/romigami
Pinwheel Tessellation (Extended) by Devon H.
Pinwheel Tessellation (Extended) by Devon H. (USA) This is a model I designed after reading a small portion of Robert Lang’s “Origami Design Secrets.” More originals and diagrams can be found at my website: devorigami.webs.com
Kids on a Seesaw by Devon H.
Kids on a Seesaw by Devon H. (USA) An original model that I designed based on the discovery that I could make a human figure from a small portion of paper. You can actually tilt it back and forth, and it works very well when placed on the dashboard of your car. More original models… Continue reading Kids on a Seesaw by Devon H.
Crane Hat by Brenda
Crane Hat by Brenda (Dallas) This hat was originally created for Cinco da Mayo with tiny paper cranes surrounding the brim and is worn by a large paper crane.
3D Peacock by Deepika Pratap
3D Peacock by Deepika Pratap (Santa Clara, CA, US) Origami 3D peacock
Modular Origami by Deepika Pratap
Modular Origami by Deepika Pratap (Santa Clara, CA, US) Five Intersecting Tetrahedra
Origami Architecture Greeting Cards by Joyce Aysta
Origami Architecture Greeting Cards by Joyce Aysta (Los Angeles) I make Origami Architecture greeting cards of Los Angeles, San Francisco, and Washington DC architecture. in addition I make Just for Fun, Christmas and Judaic cards. You can find my cards at www.liveyourdreamdesigns.com
Origami by Maria
Origami by Maria (Oklahoma)
Australia by Michael Clonarisa
Australia by Michael Clonarisa (Japan) Made from rectangle 2 by 1 paper.From a jumping frog base.Purists can make this with square piece ,fold in half and away you go.if you want to learn it search You tube.its there.by theorigamipeople .
Ancient Dragon by Thomas Leung
Ancient Dragon by Thomas Leung (Longueuil, Canada) This is Satoshi Kamiya’s Ancient Dragon. I used a 50X50 cm sheet. (Kurotani #16). I hope that you’ll enjoy it! ~(^_^)~
Deadalus and Icarus’s Flight by Joseph Benton
Deadalus and Icarus’s Flight by Joseph Benton (Aliquippa PA USA) Hope you like them. Took me almost forever.
Origami Cobra Family by Johann
Origami Cobra Family by Johann (Deurne, Antwerp, Belgium) Demons were often regarded as the evil of darkness. This will change in my classic love story about a female demon snake ‘Susu’ who fell in love with a poor farmer ‘Xian’. The story began in the Far East of Asia. The snake demon Susu played with… Continue reading Origami Cobra Family by Johann
Quilling by Maria
Quilling by Maria (oklahoma) I begin to quill with some friends That I lot contact for many years Just recent I receive their letter with some instructions how to quill? so Learn just few pattern here. new quilling
The F118 Jet by Jeremiah
The F118 Jet by Jeremiah (Virginia) This paper plane took some time to make but came out great
Origami Luster by Mohsen Moossavi Zadeh
Origami Luster by Mohsen Moossavi Zadeh (Mashhad, Khorasan Razavi, Iran)
Flat Luster by Mohsen Moossavi Zadeh
Flat Luster by Mohsen Moossavi Zadeh (Mashhad, Khorasan Razavi, Iran) Origami Flat Luster Design and folded by Mohsen Moossavi zadeh
Hat by Mohsen Moossavi Zadeh
Hat by Mohsen Moossavi Zadeh (Mashhad, Khorasan Razavi, Iran) Origami Hat
Flower Tato by Romie
Flower Tato by Romie (Philippines) I made this tato starting with the traditional star box. To learn how to fold this model, go to http://romigami.wordpress.com/2012/11/30/turning-the-classic-star-box-into-a-tato/
Lovebirds Box by Romie
Lovebirds Box by Romie (Philippines) I made this model starting from a waterbomb base. To see more of my original origami creations, visit my origami blog at http://romigami.wordpress.com
Senbazuru Ring by Stephanie K
Senbazuru Ring by Stephanie K (Oregon, USA) I folded all 1,000 cranes over the course of four days, and later strung them together, 40 strings of 25 cranes, and attached them to a ring. The cranes are hanging from my ceiling over my bed. Each crane is one inch (2.5 cm) high.
Tera Crystal Cube by Stephanie K
Tera Crystal Cube by Stephanie K (Oregon, USA) The Tera Crystal Cube is made of 1,134 sheets of 2 1/8″ (5.4 cm) square paper, and 1,536 sheets of 1 1/16″ (2.7 cm) square paper, for a total of 2,670 units. The instructions for the cubes and how to connect them are in Tomoko Fuse’s book… Continue reading Tera Crystal Cube by Stephanie K
Springs by Krystyna Burczyk
Springs by Krystyna Burczyk (Krakow, Poland) It’s my own design made of strips (2012)
Beans by Krystyna Burczyk
Beans by Krystyna Burczyk (Krakow, Poland) It’s my own work made of 72 modules (September 2012)
Stars by Krystyna Burczyk
Stars by Krystyna Burczyk by Krystyna Burczyk (Krakow, Poland) It’s my own work made of 24 modules (June 24th 2012)
Golden Dream by Krystyna Burczyk
Golden Dream by Krystyna Burczyk (Krakow, Poland) It’s my own design made of 24 modules (June 2012)
Wedding “Save the Date” & Invitation Cards by Giovannirussografico
Wedding “Save the Date” & Invitation Cards by Giovannirussografico (info@giovannirussografico.com) Our POP-UP CARDS are an Elegant and Refined article, Ideal for every occasion, Unique of its kind thanks to the original Tridimensionality. The study and attention to detail, as well as the high quality materials used for their production make them an Exclusive and Distinguishing… Continue reading Wedding “Save the Date” & Invitation Cards by Giovannirussografico
Commercial & Advertising Subjects by GIOVANNIRUSSOGRAFICO
Commercial & Advertising Subjects by GIOVANNIRUSSOGRAFICO (Limena, Padova, Italy) Our POP-UP CARDS are an Elegant and Refined article, Ideal for every occasion, Unique of its kind thanks to the original Tridimensionality. The study and attention to detail, as well as the high quality materials used for their production make them an Exclusive and Distinguishing item,… Continue reading Commercial & Advertising Subjects by GIOVANNIRUSSOGRAFICO
Christmas Greetings by GIOVANNIRUSSOGRAFICO
Christmas Greetings by GIOVANNIRUSSOGRAFICO (Limena, Padova, Italy) Our POP-UP CARDS are an Elegant and Refined article, Ideal for every occasion, Unique of its kind thanks to the original Tridimensionality. The study and attention to detail, as well as the high quality materials used for their production make them an Exclusive and Distinguishing item, too. They… Continue reading Christmas Greetings by GIOVANNIRUSSOGRAFICO
Medieval Castles by Giovannirussografico
Medieval Castles by Giovannirussografico (Limena, Padova, Italy) Our POP-UP CARDS are an Elegant and Refined article, Ideal for every occasion, Unique of its kind thanks to the original Tridimensionality. The study and attention to detail, as well as the high quality materials used for their production make them an Exclusive and Distinguishing item, too. They… Continue reading Medieval Castles by Giovannirussografico
British Cathedrals by GIOVANNIRUSSOGRAFICO
British Cathedrals by GIOVANNIRUSSOGRAFICO (Limena, Padova, Italy) Our POP-UP CARDS are an Elegant and Refined article, Ideal for every occasion, Unique of its kind thanks to the original Tridimensionality. The study and attention to detail, as well as the high quality materials used for their production make them an Exclusive and Distinguishing item, too. They… Continue reading British Cathedrals by GIOVANNIRUSSOGRAFICO
Tennis Club & Hotels by Giovannirussografico
Tennis Club & Hotels by Giovannirussografico (Limena, Padova, Italy) Our POP-UP CARDS are an Elegant and Refined article, Ideal for every occasion, Unique of its kind thanks to the original Tridimensionality. The study and attention to detail, as well as the high quality materials used for their production make them an Exclusive and Distinguishing item,… Continue reading Tennis Club & Hotels by Giovannirussografico
Venetian Villas and French Chateau by Giovannirussografico
Venetian Villas and French Chateau by Giovannirussografico (Limena, Padova, Italy) Our POP-UP CARDS are an Elegant and Refined article, Ideal for every occasion, Unique of its kind thanks to the original Tridimensionality. The study and attention to detail, as well as the high quality materials used for their production make them an Exclusive and Distinguishing… Continue reading Venetian Villas and French Chateau by Giovannirussografico
Monuments of Venice, Italy by Giovannirussografico
Monuments of Venice, Italy by Giovannirussografico (Limena, Padova, Italy) Our POP-UP CARDS are an Elegant and Refined article, Ideal for every occasion, Unique of its kind thanks to the original Tridimensionality. The study and attention to detail, as well as the high quality materials used for their production make them an Exclusive and Distinguishing item,… Continue reading Monuments of Venice, Italy by Giovannirussografico
Monuments of Rome, Italy by Giovannirussografico
Monuments of Rome, Italy by Giovannirussografico (Limena, Padova, Italy) Our POP-UP CARDS are an Elegant and Refined article, Ideal for every occasion, Unique of its kind thanks to the original Tridimensionality. The study and attention to detail, as well as the high quality materials used for their production make them an Exclusive and Distinguishing item,… Continue reading Monuments of Rome, Italy by Giovannirussografico
Monuments of Padua, Italy by Giovannirussografico
Monuments of Padua, Italy by Giovannirussografico (Limena, Padova, Italy) Our POP-UP CARDS are an Elegant and Refined article, Ideal for every occasion, Unique of its kind thanks to the original Tridimensionality. The study and attention to detail, as well as the high quality materials used for their production make them an Exclusive and Distinguishing item,… Continue reading Monuments of Padua, Italy by Giovannirussografico
Monuments of Milan, Italy by Giovannirussografico
Monuments of Milan, Italy by Giovannirussografico (Limena, Padova, Italy) Our POP-UP CARDS are an Elegant and Refined article, Ideal for every occasion, Unique of its kind thanks to the original Tridimensionality. The study and attention to detail, as well as the high-quality materials used for their production, make them an Exclusive and Distinguishing item, too.… Continue reading Monuments of Milan, Italy by Giovannirussografico
Homem Cartaz / Man Sandwich Board
Homem Cartaz / Man Sandwich Board by Nuno Silva (Ribeira Grande, São Miguel, Açores, Portugal) Esse é um outro modelo criado por mim com um rectângulo de um folha A4 This is another model that I created with a rectangle of an A4 sheet